Motorola PR400 manual Wall Charger, Desktop Chargers, Rapid Charger

RADIO OVERVIEW

WALL CHARGER

Note: Do not use the wall charger if using lithium-ion (Li-Ion) or nickel-metal hydride (NiMH) batteries. The wall charger is for a nickel-cadmium (NiCd) battery only.

To Charge the Battery:

1Turn the radio off.

2Lift the dust cover to expose the audio accessory connector.

3Insert the charging adapter into the accessory connector.

4Plug the charging adapter into an electrical outlet.

•The LED on the charging adapter lights Red while the charger is plugged into an electrical outlet.

Note: Do not leave the charger connected to the radio when it is not connected to the electrical outlet.

12

5Unplug the charger from the electrical outlet and radio after 10 hours.

Note: After the initial charge of 14 to 16 hours, do not charge the battery more than 10 hours.

DESKTOP CHARGERS

Rapid Charger

1Turn the radio off.

2Place the battery, with or without the radio, in the charger pocket.

•The charger LED indicates the charging progress.

LED color	Status
No LED Indication	Battery inserted incorrectly
	or battery not detected.
Single Green Flash	Successful charger
	power-up.
Flashing Reda	Battery unchargeable or not
	making proper contact.
Steady Red	Battery is in Rapid charge
	mode.

English