Using the lower oven probe.

www.GEAppliances.com

For many foods, especially roasts and poultry, internal food temperature is the best test for doneness.

The temperature probe takes the guesswork out of roasting by cooking foods to the exact doneness you want.

Safety

The temperature probe has a skewer-like probe at one end and a plug at the other end that goes into the outlet in the oven.

NOTE: The probe is for use in the lower oven only.

Use of probes other than the one provided with this product may result in damage to the probe.

Use the handles of the probe and plug when inserting and removing them from the meat and outlet.

■To avoid damaging your probe, do not use tongs to pull on the cable when removing it.

■To avoid breaking the probe, make sure food is completely defrosted before inserting.

Cable

Plug

Probe

Handles

■To prevent possible burns, do not unplug the probe from the outlet until the oven has cooled.

■Never leave your probe inside the oven during a self-cleaning cycle.

■Do not store the probe in the cooking center.

Instructions Operating Instructions

After preparing the meat and placing it on a trivet or on the broiler pan grid, follow these directions for proper probe placement.

Lay the probe on the outside of the meat along the top or side and mark with your finger where the edge of the meat comes to on the probe. The point should rest in the center of the thickest meaty part of the roast.

Insert the probe completely into the meat. It should not touch the bone, fat or gristle.

For roasts with no bone, insert the probe into the meatiest part of the roast. For bone-in ham or lamb, insert the probe into the center of the lowest large muscle or joint.

Insert the probe into the center of dishes such as meat loaf or casseroles. When cooking fish, insert the probe from just above the gill into the meatiest area, parallel to the backbone.

Insert the probe into the meatiest part of the inner thigh from below and parallel to the leg of a whole turkey.

Care and Cleaning

How to Set the Oven For Roasting When Using the Probe

Insert the probe into the meat.

Plug the probe into the outlet in the oven. Make sure it’s pushed all the way in. Close the oven door.

Press the PROBE pad.

Press the number pads to set the desired internal food or meat temperature.

Press the BAKE pad.

Press the number pads to set the desired oven temperature.

Press the START pad.

The display will flash if the probe is inserted into the outlet and you have not set a probe temperature and pressed the START pad.

When the oven starts to heat, the word LO will be in the display.

After the internal temperature of the meat reaches 100°F., the changing internal temperature will be shown in the display.

When the internal temperature of the meat reaches the temperature you have set, the probe and the oven turn off and the oven control signals. To stop the signal, press the CLEAR/OFF pad. Use hot pads to remove the probe from the food. Do not use tongs to pull on it—they might damage it.

To change the oven temperature during the Roast cycle, press the BAKE pad and then the number pads to set the new temperature.

■ If the probe is removed from the food before the final temperature is reached, a tone will sound and the display will flash until the probe is removed from the oven.

■ You can use the timer even though

31

you cannot use timed oven operations.

Troubleshooting Tips Consumer Support

Page 30 Page 32
Page 31
Image 31
GE JTP95 owner manual Using the lower oven probe, Troubleshooting Tips Consumer Support
Page 30 Page 32

JTP95 specifications

The GE JTP95 is a notable entry in General Electric's line of high-performance jet engines, designed primarily for commercial aviation applications. Known for its advanced technological features, the JTP95 integrates innovative design elements that enhance efficiency, performance, and reliability while minimizing environmental impact.

At the heart of the JTP95 engine is its turbofan configuration, which combines superior thrust capabilities with reduced noise levels. This design not only provides the necessary power for larger aircraft but also adheres to increasingly stringent noise regulations, making it a favorite among carriers operating in noise-sensitive areas.

One of the standout features of the GE JTP95 is its advanced materials technology. The engine incorporates lightweight composite materials and high-strength alloys, which contribute to fuel efficiency while ensuring durability under stress. These materials allow for higher operating temperatures, leading to improved thermal efficiency and overall performance.

The engine utilizes an innovative full authority digital engine control (FADEC) system, which optimizes fuel consumption and engine performance in real-time. This system ensures that the engine operates at peak efficiency throughout various flight conditions, providing pilots with valuable performance data and enhancing safety measures.

Moreover, the JTP95 is designed with a bypass ratio that significantly reduces emissions when compared to older engine models. The high bypass ratio means that a larger proportion of air is directed around the engine core, which not only improves fuel efficiency but also results in lower carbon emissions, aligning with the industry's shift towards more sustainable aviation solutions.

Maintenance is another area where the GE JTP95 excels. The engine features modular design components, allowing for easier access to critical parts during servicing. This reduces downtime and associated costs for airlines, while also enhancing the overall reliability of the engine over its lifespan.

In summary, the GE JTP95 stands out in the aviation sector for its combination of innovative technologies, advanced materials, and efficient design. It exemplifies GE's commitment to developing engines that meet modern demands for performance, reliability, and environmental stewardship, making it a key player in the future of commercial aviation. Organizations looking for a high-performance and environmentally friendly solution for their fleet will find the JTP95 to be an ideal choice.
Top Page Image Contents