www.GEAppliances.com

Microwave Oven Control Features and Settings

Safety Instructions

POWER LEVEL

Press to choose the power level you want to set. Watch the display while pressing this pad to select the power level you want to set. You will also see a defrost level. This setting will allow you to choose your own defrost time by using the number pads.

Number Pads

After pressing a function pad, press the number pads to set the exact amount of time you want to cook for. For example; if you press the 1, 2 and 5 pads, you have set 1 minute and 25 seconds.

REMINDER

The REMINDER feature can be used like an alarm clock, and it can be used at any time, even when the oven is operating. The reminder can be set up to 24 hours later.

DELAY START

Allows you to set the microwave to delay cooking up to 24 hours.

AM/PM

Allows you to set the microwave for AM or PM during timed cooking operations.

Operating Instructions

CLEAR/OFF

Press once to interrupt or change a function. Press twice to clear the display.

SOUND LEVEL

The beeper sound level can be adjusted. Press the SOUND LEVEL pad Choose 0–3 for mute to loud.

CLOCK/SCROLL SPEED

Press this pad before setting the clock.

The scroll speed of the display can be changed. Press and hold the CLOCK/SCROLL SPEED pad about 3 seconds to bring up the display. Select 1–5 for slow to fast scroll speed.

Care and

START/PAUSE

After all selections are made, press this pad to start the oven. The START/PAUSE pad must be pressed to turn on any function.

In addition to starting many functions, START/PAUSE allows you to stop cooking without opening the microwave oven door or clearing the display.

KITCHEN TIMER MIN/SEC

Press to set the timer up to 99 minutes and 99 seconds. Press the number pads to set the time. Press the KITCHEN TIMER MIN/SEC pad. Press the KITCHEN TIMER MIN/SEC pad twice to clear the display.

Does not turn on microwave energy.

This timer cannot be used while the microwave is being used. Use the lower oven timer.

11

Cleaning Troubleshooting Tips Consumer Support

Page 11
Image 11
GE JTP95 owner manual Cleaning Troubleshooting Tips Consumer Support, Care, Does not turn on microwave energy

JTP95 specifications

The GE JTP95 is a notable entry in General Electric's line of high-performance jet engines, designed primarily for commercial aviation applications. Known for its advanced technological features, the JTP95 integrates innovative design elements that enhance efficiency, performance, and reliability while minimizing environmental impact.

At the heart of the JTP95 engine is its turbofan configuration, which combines superior thrust capabilities with reduced noise levels. This design not only provides the necessary power for larger aircraft but also adheres to increasingly stringent noise regulations, making it a favorite among carriers operating in noise-sensitive areas.

One of the standout features of the GE JTP95 is its advanced materials technology. The engine incorporates lightweight composite materials and high-strength alloys, which contribute to fuel efficiency while ensuring durability under stress. These materials allow for higher operating temperatures, leading to improved thermal efficiency and overall performance.

The engine utilizes an innovative full authority digital engine control (FADEC) system, which optimizes fuel consumption and engine performance in real-time. This system ensures that the engine operates at peak efficiency throughout various flight conditions, providing pilots with valuable performance data and enhancing safety measures.

Moreover, the JTP95 is designed with a bypass ratio that significantly reduces emissions when compared to older engine models. The high bypass ratio means that a larger proportion of air is directed around the engine core, which not only improves fuel efficiency but also results in lower carbon emissions, aligning with the industry's shift towards more sustainable aviation solutions.

Maintenance is another area where the GE JTP95 excels. The engine features modular design components, allowing for easier access to critical parts during servicing. This reduces downtime and associated costs for airlines, while also enhancing the overall reliability of the engine over its lifespan.

In summary, the GE JTP95 stands out in the aviation sector for its combination of innovative technologies, advanced materials, and efficient design. It exemplifies GE's commitment to developing engines that meet modern demands for performance, reliability, and environmental stewardship, making it a key player in the future of commercial aviation. Organizations looking for a high-performance and environmentally friendly solution for their fleet will find the JTP95 to be an ideal choice.