Instructions

Using the lower convection oven.

How to Set the Oven for Convection Roasting when Using the Probe

and Cleaning Operating Instructions Safety

For best results when roasting large turkeys and roasts, we recommend using the probe included in the convection oven.

The display will flash PROBE and the oven control will signal if the probe is inserted into the outlet, and you have not set a probe temperature and pressed the START pad.

Place the shelf in the lowest position

(A). Insert the probe into the meat.

Plug the probe into the outlet in the oven. Make sure it is pushed all the way in. Close the oven door.

Press the CONVECTION ROAST pad.

Press the number pads to set the desired oven temperature.

Press the PROBE pad.

Press the number pads to set the desired internal meat temperature.

Press the START pad.

When the oven starts to heat, the word LO will be in the display. After the internal temperature of the meat reaches 100°F., the changing internal temperature will be shown in the display.

When the internal temperature of the meat reaches the temperature you have set, the probe and the oven turn off and the oven control signals. To stop the signal, press the CLEAR/OFF pad. Use hot pads to remove the probe from the food. Do not use tongs to pull on it—they might damage it.

CAUTION: To prevent possible burns, do not unplug the probe from the oven outlet until the oven has cooled. Do not store the probe in the cooking center.

NOTE:

If the probe is removed from the food before the final temperature is reached, a tone will sound and the display will flash until the probe is removed from the oven.

You will hear a fan while cooking with this feature. The fan will stop when the door is opened but the heat will not turn off.

You can use the timer even though you cannot use timed oven operations.

Consumer Support Troubleshooting Tips Care

To change the oven temperature during the Convection Roast cycle, press the CONVECTION ROAST pad and then press the number pads to set the new desired temperature.

34

Convection Roasting Guide

Meats

 

 

Minutes/Lb.

Oven Temp.

Internal Temp.

Beef

Rib, Boneless Rib,

Rare

20–24

325°F.

140°F.†

 

Top Sirloin

Medium

24–28

325°F.

160°F.

 

(3 to 5 lbs.)

Well

28–32

325°F.

170°F.

 

Beef Tenderloin

Rare

10–14

325°F.

140°F.†

 

 

Medium

14–18

325°F.

160°F.

Pork

Bone-in, Boneless (3 to 5 lbs.)

 

23–27

325°F.

170°F.

 

Chops (1/2 to 1thick)

2 chops

30–35 total

325°F.

170°F.

 

 

4 chops

35–40 total

325°F.

170°F.

 

 

6 chops

40–45 total

325°F.

170°F.

Ham

Canned, Butt, Shank (3 to 5 lbs. fully cooked)

14–18

325°F.

140°F.

Lamb

Bone-in, Boneless (3 to 5 lbs.)

Medium

17–20

325°F.

160°F.

 

 

Well

20–24

325°F.

170°F.

Seafood

Fish, whole (3 to 5 lbs.)

 

30–40 total

400°F.

 

 

Lobster Tails (6 to 8 oz. each)

 

20–25 total

350°F.

 

Poultry

Whole Chicken (212 to 312 lbs.)

 

24–26

350°F.

180°–185°F.

 

Cornish Hens Unstuffed (1 to 112 lbs.)

 

50–55 total

350°F.

180°–185°F.

 

Stuffed (1 to 112 lbs.)

 

55–60 total

350°F.

180°–185°F.

 

Duckling (4 to 5 lbs.)

 

24–26

325°F.

180°–185°F.

 

Turkey, whole*

 

 

 

 

 

Unstuffed (10 to 16 lbs.)

 

8–11

325°F.

180°–185°F.

 

Unstuffed (18 to 24 lbs.)

 

7–10

325°F.

180°–185°F.

 

Turkey Breast (4 to 6 lbs.)

 

16–19

325°F.

170°F.

*Stuffed birds generally require 30–45 minutes additional roasting time. Shield legs and breast with foil to prevent over- browning and drying of skin.

The U.S. Department of Agriculture says “Rare beef is popular, but you should know that cooking it to only 140°F. means some food poisoning organisms may survive.” (Source: Safe Food Book. Your Kitchen Guide. USDA Rev. June 1985.)

Page 34
Image 34
GE JTP95 owner manual Convection Roasting Guide, Press the Convection Roast pad

JTP95 specifications

The GE JTP95 is a notable entry in General Electric's line of high-performance jet engines, designed primarily for commercial aviation applications. Known for its advanced technological features, the JTP95 integrates innovative design elements that enhance efficiency, performance, and reliability while minimizing environmental impact.

At the heart of the JTP95 engine is its turbofan configuration, which combines superior thrust capabilities with reduced noise levels. This design not only provides the necessary power for larger aircraft but also adheres to increasingly stringent noise regulations, making it a favorite among carriers operating in noise-sensitive areas.

One of the standout features of the GE JTP95 is its advanced materials technology. The engine incorporates lightweight composite materials and high-strength alloys, which contribute to fuel efficiency while ensuring durability under stress. These materials allow for higher operating temperatures, leading to improved thermal efficiency and overall performance.

The engine utilizes an innovative full authority digital engine control (FADEC) system, which optimizes fuel consumption and engine performance in real-time. This system ensures that the engine operates at peak efficiency throughout various flight conditions, providing pilots with valuable performance data and enhancing safety measures.

Moreover, the JTP95 is designed with a bypass ratio that significantly reduces emissions when compared to older engine models. The high bypass ratio means that a larger proportion of air is directed around the engine core, which not only improves fuel efficiency but also results in lower carbon emissions, aligning with the industry's shift towards more sustainable aviation solutions.

Maintenance is another area where the GE JTP95 excels. The engine features modular design components, allowing for easier access to critical parts during servicing. This reduces downtime and associated costs for airlines, while also enhancing the overall reliability of the engine over its lifespan.

In summary, the GE JTP95 stands out in the aviation sector for its combination of innovative technologies, advanced materials, and efficient design. It exemplifies GE's commitment to developing engines that meet modern demands for performance, reliability, and environmental stewardship, making it a key player in the future of commercial aviation. Organizations looking for a high-performance and environmentally friendly solution for their fleet will find the JTP95 to be an ideal choice.