www.GEAppliances.com

WARNING!

SELF-CLEANING LOWER OVEN

Do not use aluminum foil to line oven bottoms, except as suggested in this manual. Improper installation of aluminum foil may result in a risk of electric shock or fire.

Safety Instructions

■Stand away from the oven when opening the oven door. Hot air or steam which escapes can cause burns to hands, face and/or eyes.

■Do not heat unopened food containers. Pressure could build up and the container could burst, causing an injury.

■Keep the oven vent unobstructed.

■Keep the oven free from grease buildup.

■Keep the cooking center clean and free of accumulations of grease or spillovers, which may ignite.

■Never leave the oven door open when you are not watching the cooking center.

■Place the oven shelf in the desired position while the oven is cool. If shelves must be handled when hot, do not let pot holder contact the heating elements.

■When using cooking or roasting bags

in the oven, follow the manufacturer’s directions.

■Pulling out the shelf to the stop-lock is a convenience in lifting heavy foods. It is also a precaution against burns from touching hot surfaces of the door or oven walls.

■Do not use the oven for a storage area. Items stored in an oven can ignite.

■Do not leave paper products, cooking utensils or food in the oven when not in use.

■After broiling, always take the broiler pan out of the oven and clean it. Leftover

grease in the broiler pan can catch fire next time you use the oven.

■Do not use the oven to dry newspapers. If overheated, they can catch on fire.

■Never leave jars or cans of fat drippings in or near your oven.

■Clean only parts listed in this Owner’s Manual.

■Do not clean the door gasket. The door gasket is essential for a good seal. Care should be taken not to rub, damage or move the gasket.

■Do not use oven cleaners. No commercial oven cleaner or oven liner protective coating of any kind should be used in or around any part of the oven. Residue from oven cleaners will damage the inside of the oven when the self-clean cycle is used.

■Before self-cleaning the oven, remove the probe, broiler pan, grid and other cookware.

■Be sure to wipe up excess spillage before starting a self-cleaning cycle.

■If the self-cleaning mode malfunctions, turn the oven off and disconnect the power supply. Have it serviced by a qualified technician.

■Listen for a fan— a fan noise should be heard sometime during the cleaning cycle. If not, call for service before self-cleaning again.

Operating Instructions Care and Cleaning Troubleshooting Tips Consumer

READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.

SAVE THESE INSTRUCTIONS

9

Support

Page 8 Page 10
Page 9
Image 9
GE JTP95 owner manual SELF-CLEANING Lower Oven, Support
Page 8 Page 10

JTP95 specifications

The GE JTP95 is a notable entry in General Electric's line of high-performance jet engines, designed primarily for commercial aviation applications. Known for its advanced technological features, the JTP95 integrates innovative design elements that enhance efficiency, performance, and reliability while minimizing environmental impact.

At the heart of the JTP95 engine is its turbofan configuration, which combines superior thrust capabilities with reduced noise levels. This design not only provides the necessary power for larger aircraft but also adheres to increasingly stringent noise regulations, making it a favorite among carriers operating in noise-sensitive areas.

One of the standout features of the GE JTP95 is its advanced materials technology. The engine incorporates lightweight composite materials and high-strength alloys, which contribute to fuel efficiency while ensuring durability under stress. These materials allow for higher operating temperatures, leading to improved thermal efficiency and overall performance.

The engine utilizes an innovative full authority digital engine control (FADEC) system, which optimizes fuel consumption and engine performance in real-time. This system ensures that the engine operates at peak efficiency throughout various flight conditions, providing pilots with valuable performance data and enhancing safety measures.

Moreover, the JTP95 is designed with a bypass ratio that significantly reduces emissions when compared to older engine models. The high bypass ratio means that a larger proportion of air is directed around the engine core, which not only improves fuel efficiency but also results in lower carbon emissions, aligning with the industry's shift towards more sustainable aviation solutions.

Maintenance is another area where the GE JTP95 excels. The engine features modular design components, allowing for easier access to critical parts during servicing. This reduces downtime and associated costs for airlines, while also enhancing the overall reliability of the engine over its lifespan.

In summary, the GE JTP95 stands out in the aviation sector for its combination of innovative technologies, advanced materials, and efficient design. It exemplifies GE's commitment to developing engines that meet modern demands for performance, reliability, and environmental stewardship, making it a key player in the future of commercial aviation. Organizations looking for a high-performance and environmentally friendly solution for their fleet will find the JTP95 to be an ideal choice.
Top Page Image Contents