Motorola PR400 manual Select AN LTR CHANNEL/ Talkgroup, Select a Conventional Radio Channel

GETTING STARTED

SELECT AN LTR CHANNEL/ TALKGROUP

Your PR400 radio can be programmed with up to 4 LTR sites and a maximum of 16 talkgroups, in total, across one or more sites (up to a total of 4 sites).

To select an LTR channel/talkgroup:

Turn the Channel Selector knob to select the appropriate LTR channel/talkgroup.

–or–

Press any of the programmable buttons to access a preprogrammed talkgroup. Then use the Channel Selector knob to select the appropriate LTR channel/talkgroup.

Note: The second option is available only if your radio has been programmed with a specified LTR channel/ talkgroup.

Note: Site/talkgroup settings are programmed by your dealer.

20

SELECT A CONVENTIONAL RADIO CHANNEL

Your radio offers 16 conventional channels.

To select a channel, turn the Channel Selector knob clockwise or counterclockwise until you reach the desired channel.

RECEIVE A CONVENTIONAL OR LTR CALL

1Turn your radio on.

2Adjust the radio’s volume (see page 19).

3Turn the Channel Selector knob to select the appropriate LTR channel/talkgroup.

•Make sure the PTT button is released.

4Listen for voice activity.

•The LED indicator flashes red while your radio is receiving.

5To respond, hold the radio vertically 1 to 2 inches (2.5 to 5cm) from your mouth. Press the PTT button to talk; release it to listen.

English