Motorola MVME712A/D3, MVME712-12 Connector J6 Interconnect Signals MVME712-13, MVME712AM

Page 47

3

Support Information

Connector J6 Interconnect Signals (MVME712-13, MVME712AM)

Connector J6 is the modem RING and TIP from the Telco front panel jack on the MVME712-13 and MVME712AM. Each pin connection, signal mnemonic, and signal characteristic for the connector is listed in Table 3-9.

Table 3-9. Connector J6 Interconnect Signals (MVME712-13/AM)

	Pin	Signal	Signal Name and Description
	Number	Mnemonic	Signal Name and Description
	Number	Mnemonic


	1	TIP	Tip side of telephone line.

	2	RING	Ring side of telephone line.

Connector J7 Interconnect Signals (MVME712-13, MVME712AM)

Connector J7 is the onboard modem interconnect (refer to Appendix A for details on the modem). Each pin connection, signal mnemonic, and signal characteristic for the connector is listed in Table 3-10.

Table 3-10. Connector J7 Interconnect Signals (MVME712-13/AM)

	Pin	Signal	Signal Name and Description
	Number	Mnemonic	Signal Name and Description
	Number	Mnemonic


	1	MDMTXD2	TRANSMIT DATA - data to be transmitted is
			furnished on this line to the modem from the
			terminal.

	2,3		Not used.

	4	-12VMODEM	-12 Vdc Power - used by the modem.

	5	+5VMODEM	+5 Vdc Power - used by the modem.

	6		Not used.

	7	MDMDTR2	DATA TERMINAL READY - an active low
			signal from the terminal to the modem
			indicating that the terminal is ready to send or
			receive data.

	8,9		Not used.

	10	GND	GROUND - modem circuit ground interface.

	11	MDMCTS2	CLEAR TO SEND - an active low signal that the
			modem maintains in the on state.

	12		Not used.

3-14	MVME712-12/-13/A/AM/B Transition Modules and LCP2 Adapter Board UserÕs Manual

Image 47

Contents

MVME712A/D3 MVME712A, MVME712AMRestricted Rights Legend Document Title Motorola Publication Number PrefaceRelated Documentation Manual Terminology Page Safety Summary Safety Depends On You This equipment generates, uses, and can radiate radio Page Contents Page List of Figures Collective Reference Features of the MVME712 Family ModulesIntroduction MVME712 Family Speciﬁcations Features of the LCP2 Adapter BoardCharacteristics SpeciÞcations SpeciﬁcationsFCC Compliance Cooling RequirementsGeneral Description MVME712x Module Preparation Unpacking InstructionsMVME712-12 Header Locations MVME712x Module Preparation LocationsMVME712AFigure 2-3.Header InstallationHardware PreparationLMVME712AMocationsFigure 2-4.Header DCE DTE DSR Line Pull Up Select Headers J8, J9, J13, J14Modem Port Conﬁguration Serial Port 2/Modem Port 2 Select J16, J17Ote Serial Port ConﬁgurationScsi Termination MVME712B Module PreparationMVME712B Connector Locations LCP2 Adapter Board Preparation LCP2 Adapter Connector LocationsInstallation Instructions Installing for Use with Internal Scsi Devices Internal Scsi and Serial Port Connections Installing the MVME712-13 and MVME712AM as a Modem Internal Scsi and Modem Connections MVME712B Installation MVME712B External Scsi Connections Hardware Preparation and Installation From Interconnect SignalsLCP2 and MVME712 Connectors MVME712 JumpersPin Signal Signal Name and Description Number Mnemonic Connector P2 Interconnect Signals LCP2 AdapterConnectors J1, J3-J5 Interconnect Signals MVME712x Connectors J1, J3-J5 Interconnect Signals MVME712xCTS RTSConnector J2 Interconnect Signals LCP2 Adapter Connector J2 Interconnect Signals LCP2 AdapterPrbsy GND Ground PrfaultPrack PrpeGND Ground RTS1 DTR3TXD1 GND Ground RXD1CTS4 RTS4GND Ground TRXC4 DTR4DTR2 CTS2RTS2 DCD2Connector J3 Interconnect Signals LCP2 Adapter Connector J2 Interconnect Signals MVME712-13, MVME712AMConnector J3 Interconnect Signals LCP2 Adapter Connector Connector J2 Interconnect Signals MVME712-13/AM GND Ground BSY Termpwr Terminator Power GND Ground DBP GND Ground ATNGND Ground REQ Connector Scsi Interface Interconnect Signals MVME712BScsi Interface Interconnect Signals MVME712B GND Ground Termpwr Terminator Power MAU Connector Ethernet Interconnect Signals MVME712BEthernet Interconnect Signals MVME712B 10. Connector J7 Interconnect Signals MVME712-13/AM Connector J6 Interconnect Signals MVME712-13, MVME712AMConnector J7 Interconnect Signals MVME712-13, MVME712AM Connector J6 Interconnect Signals MVME712-13/AMMDMDCD2 Connector J10 Interconnect Signals MVME712x11. Connector J10 Interconnect Signals MVME712x MDMRXD2Pin Number Signal Signal Name and Description J11 Mnemonic Connector P2 and J11 Interconnect Signals MVME712x12. Connector P2, J11 Interconnect Signals MVME712x Data bit 6 Printer A16 A23 13. Connector J12 Interconnect Signals MVME712-13/12AM Connector J12 Interconnect Signals MVME712-13, MVME712AM14. Connector J15 Interconnect Signals MVME712x Connector J15 Interconnect Signals MVME712xReference Motorola Description Designation Part Number Parts Lists and Locations15. MVME712 x Module Parts List Model Parts List Parts Location Drawing15. MVME712x Module Parts List Modem kit MVME712-13 and MVME712AM MVME7121.-3FigureocationL-12 Parts SideMVME712-13 Parts Location Drawing Primary Side DrawingFigure 3-3. MVME712A Parts LocationPrimary Side 1532 CR3 CR4 CR5 CR6 CR7 CR8 CR9 PartsMVME712AMFigure 3-4.Location Drawing Primary SideReference Motorola Designation Support Information MVME712A and MVME712AMMVME712B Parts Location Drawing CR1 17. LCP2 Adapter Module Parts ListMVME712AM LCP2 Schematic DrawingsModule Board Part Number Pages Support Information Modem Features BeneÞts Modem FeaturesTable A-1. Modem Features TTL/CMOS Characteristic SpeciÞcationTechnical Speciﬁcations Table A-2. Technical SpeciﬁcationsTable A-3. Autodialer Characteristics Index MVME712AM IN-7