Motorola MPMC101 user manual Unpacking the Adapter

Page 22

2

Hardware Installation

There are two electrical versions of the PCI and PMC

! Adapters, a single-ended version and a differential

Caution version. Make sure you have the correct type of adapter to match the bus and peripherals being connected. A mixed installation can cause electrical damage to both the peripherals and to the adapter.

Unpacking the Adapter

The board is packed in an antistatic bag or transpartent

! clamshell to protect it during shipment. Keep the

Caution adapter in the protective bag or clamshell until you are ready to install it on the motherboard of the host computer. To prevent damage to the adapter due to electromagnetic discharge, wear a grounding strap and handle the adapter only by the edges. Do not touch the components or any metal parts on the adapter, except for the metal face plate.

1.Open the shipping container and carefully remove its contents. Do not open the antistatic bag or clamshell containing the adapter at this time.

2.Verify that you have received all items on the packing list, and inspect each item for damage.

If you find any omissions or damage, contact your supplier and the carrier that delivered the package.

3.Return all packing materials to the shipping container and save.

If the board must be returned, ship it in its original box (or one providing equivalent protection). Failure to do so could void your warranty.

2-2

Image 22

Contents MPMC101 PMC SCSI-2 Adapter User’s ManualRestricted Rights Legend Preface Related Documentation Acronyms and Terminology Conventions Safety Summary Safety Depends On You Page Contents List of Figures List of Tables Xii Adapter Overview PCI SCSI-2 AdapterProduct Features Supported Software Drivers System RequirementsPCI Overview Introduction to SCSI-2 Single Initiator, Single Target SystemsTarget with Multiple Peripherals Multiple Device Conﬁguration Introduction Overview Tools RequiredUnpacking the Adapter Installing the PCI SCSI-2 Adapter Desktop PCI Slot Conﬁguration Single-ended PCI Adapter PCI SCSI-2 Adapter Jumper Settings Jumper SettingInserting the PCI Adapter Card Adapter Card Installed to Chassis Installing the PMC SCSI-2 Adapter Differential PMC SCSI-2 AdapterInstalling the PMC Adapter Installing the PMC SCSI-2 Adapter PMC SCSI-2 Adapter Jumper Settings JA4Single-ended Connecting to the Scsi BusConnector and Cable Requirements Differential10. Scsi Connector Port Software Driver Installation AIX Operating SystemsWindows NT Setup Windows NT Operating SystemsScsi Adapter Setup Setup Message Installed Adapter Listing Restart Message Problem Possible Solution Computer will Start-up ProblemsStart-up Boot-up Bootup ProblemsApplications Application ProblemsPCI and PMC Adapter Problem PCI and PMC AdapterUser Notes Table A-1. PCI and PMC Adapter Speciﬁcations HardwareSpeciÞcation Environment Connectors and CablesTable A-3. Connector and Cable Requirements Table A-2. Environmental SpeciﬁcationsScsi P Cable Contact Assignments Connector Cable Signal Contact Conductor Name NumberTable A-4. Single-ended Contact Assignments Table A-5. Differential Contact Assignments Adapter Bus Device ResetCCB Command Control Block Ansi American National Standards InstituteDMA Direct Memory Access CCS Command Control SetCDB Command Descriptor Block CPU Central Processing UnitEisa Expanded Industry Standard Architecture DriverEIA Electronic Industries Association EncodeInitiator Host nameIeee Institute of Electrical and Electronic Engineers InteroperabilityLog LocalLocal bus LU Logical UnitPCI Peripheral Component Interconnect Propagation delayRAM Random Access Memory Point-to-pointSynchronous transmission Single-endedSingle-threaded TargetPage Index PCI IN-11