7Press c to select.
8^or vto Edit Priority and press c to select.
9^or vto the required priority level and press c to select.
10The display shows mini notice before returning to the previous screen.
11The priority icon appears left of the member’s name.
There is no priority icon if priority is set to None.
Scan
When you start a scan, your radio cycles through the programmed scan list for the current channel looking for voice activity.
The LED blinks yellow and the scan icon appears on the bar.
There are two ways of initiating scan:
•Scan Button (Manual): For channels that have Auto Scan disabled, scan can be turned on and off using programmed Scan button.
•Auto Scan (Automatic): Your radio automatically starts scanning when you select a channel that has Auto Scan enabled.
NOTE: This feature is not applicable in Capacity Plus
Setting an Active Scan List
Procedure:
1cto access the menu.
2^ or v to select Scan and press c to select.
3^ or v to select Set Active List and press c to select.
4^ or v to required list and press c to select.
NOTE: The list selected will be your active scan list.
Advanced Features
39