Motorola SBV4200 manual Cabling and Startup for a Single User

Introduction Before You Begin

Installation & Configuration

Troubleshooting FAQ Glossary License

Caution

Do not connect both the Ethernet and USB cables to the same computer.

Connect to either

Ethernet or USB

P/ N: AA A AA A- BB B- 0 0	Ma de in
C M HFC MA C ID : A B CD EF0 12 3 45

C USTO MER S/ N: B CD FG HJ KLMN P

S/ N: PP PPMMY JJ J SSSS SCA A BB CC CC

U SB CPE MA C ID: A BC DE F01 2 34 5

MTA MA C ID : AB CD EF0 12 3 45

Computer SURFboard VoIP

cable modem

X

Cabling and Startup for a Single User, continued

6Connect your computer to the VoIP cable modem using USB or Ethernet:

USB: Be sure the SURFboard VoIP Cable Modem CD-ROM is inserted in your CD-ROM drive. Connect the USB cable to the USB port on the VoIP cable modem. Connect the other end to the USB port on your computer. Then perform “Setting Up a USB Driver” on page 11.

Ethernet: Connect the provided straight-through Ethernet cable to the Ethernet connector on the VoIP cable modem. Connect the other end to the Ethernet port on your computer. Ethernet users do not need to set up USB.

7Perform the procedures for “Configuring TCP/IP” on page 22.

8To connect the telephone line, plug a phone wire into the phone 1 connector. You can also connect a second telephone line to the phone 2 connector.

Caution

Contact your cable service provider before connecting your VoIP cable modem to your existing telephone wiring. Do not connect the telephone wire to a traditional telephone (PSTN) service.

Be sure the phone connectors are neither connected together nor connected to wall jacks on the same network.

10 SURFboard® SBV4200 VoIP Cable Modem User Guide

Home Print Exit