Opal Pro to Mod TCP

1.07	Input Word 9	Relay Status	Status of the Relay Outputs
			Bit 0 – Running
			Bit 1 – By-Pass
			Bit 2 – Shorted SCR
			Bit 3 – Reverse
			Bit 4 – Faulted
1.08	Input Word	Analog Output	Analog Output value in Volts X 100
	10
2.01	Input Word	Stack Size	Opal Pro Stack Size in Amps
	11
2.02	Input Word	Comm	0 – None
	12	Module Type	2 – Ethernet
2.03	Input Word	Firmware	Opal Pro Firmware Version x 100
	13	Version
10.01	Input Word	Start/Stop	4 = 2 Wire
	14	Control	5 = 3 Wire
			6 = Comm Module
10.02	Input Word	Ramp Time	Time is seconds
	15
10.03	Input Word	Step Current	In % of nameplate current
	16
10.04	Input Word	Current	7 = Internal
	17	Reference	8 = Analog Input
			9 = Comm Module
10.05	Input Word	Phase Angle	10 = Internal
	18		11 = Analog Input
			12 = Comm Module
10.06	Input Word	Jog Accel	In % of nameplate current
	19	Current Limit
10.07	Input Word	Jog Current	In % of nameplate current
	20	Limit
10.08	Input Word	Jog Ramp	Time is seconds x 10
	21
11.01	Input Word	Stop Mode	13 = Coast
	22		14 = Soft Stop
			15 = DC Injection
11.02	Input Word	Soft Stop	In % of incoming line voltage
	23	Step
11.03	Input Word	Soft Stop	Time in seconds
	24	Ramp
11.04	Input Word	DCI Current	In % of nameplate current
	25
11.05	Input Word	DCI Time	Time in seconds
	26

Page 12