AB Soft MS6 SERIES user manual Opal Pro to Mod TCP

				Opal Pro to Mod TCP
12.01	Input Word	Analog Output	16	= Current Reference
	27		17	= Current Feedback
			18	= Overload level
			19	= Phase Angle
13.01	Input Word	Motor Amps	Motor nameplate current in Amps
	28
13.02	Input Word	Motor Volts	Motor nameplate volts in Volts
	29
13.03	Input Word	Service	Motor nameplate service factor x 100
	30	Factor
14.01-14.06	Input Word	Reserved
	31- Input
	Word 36
14.07	Input Word	Node Number	1 – 254
	37
14.08	Input Word	IP Address 1	0 – 255
	38
14.09	Input Word	IP Address 2	0 – 255
	39
14.10	Input Word	IP Address 3	0 – 255
	40
14.11	Input Word	IP Address 4	0 – 255
	41
14.12	Input Word	SubNet 1	0 – 255
	42
14.13	Input Word	SubNet 2	0 – 255
	43
14.14	Input Word	SubNet 3	0 – 255
	44
14.15	Input Word	SubNet 4	0 – 255
	45
15.01	Input Word	Shear Pin Flt	34	= Enabled
	46		35	= Disabled
15.02	Input Word	MOL Fault	36	= Disabled
	47		37	= Class 10
			37	= Class 15
			37	= Class 20
			37	= Class 30
15.03	Input Word	Overload	In %
	48	Level	Drive trips at 100%
15.04	Input Word	Comm Fault	41	= Enabled
	49		42	= Disabled
15.05	Input Word	Comm Flt	Time in seconds x 10
	50	Time

Page 13