LED Indicators

Two bi-colour (red/green) LED indicators are mounted beside the network connector. The upper LED indicates the Ethernet interface card status.

LED State	Ethernet Interface Card Status
OFF	No power
Flashing Red	Recoverable configuration fault (card is not
	configured, contact Brock Solutions for support)
Solid Red	Hardware Error (contact Brock Solutions for support)
Flashing Green	No errors client interface is not open ( check software
	firmware version of Opal Pro)
Solid Green	No errors (normal operation)
Amber	Configuration Mode (card is not configured, contact
(Red/Green)	Brock Solutions for support)
The lower LED indicator indicates the Ethernet Network status.
LED State	Ethernet Network Status
OFF	Network interface offline, No network power
Flashing Red	I/O connection in timed-out state or other
	Recoverable fault
Flashing Green	Device in online but has no connections
Solid Red	Unrecoverable fault
Solid Green	Online with established connections
Amber	Device is in Communication Faulted state and
(Red/Green)	responding to an Identify Communication Faulted
	Request

Page 7

LED State