ADTRAN FT1 specifications Specifications, Warranty and Customer Service, Adtran Customer Service

6. SPECIFICATIONS

Specifications for the ADTRAN Single-Wide FT1 Repeater appear in Table D.

7. WARRANTY AND CUSTOMER SERVICE

ADTRAN will replace or repair this product within ten years from the date of shipment if it does not meet its published specifications or fails while in service (see ADTRAN Equipment Warranty, Repair, and Return Policy and Procedure).

Return Material Authorization (RMA) is required prior to returning equipment to ADTRAN.

For service, RMA requests, or further information, contact one of the following numbers.

ADTRAN Customer Service

ADTRAN Telco Technical Support . (800) 726-8663

Standard support hours	..................... Monday-Friday
	7 a.m. - 7 p.m. CST
Emergency support	7 days/week, 24 hours/day
Sales	(800) 827-0807
RMA (repair service)	(256) 963-8722

Repair and Return Address

ADTRAN, Inc.

Customer and Product Support (CAPS) Department

901 Explorer Boulevard

Huntsville, Alabama 35806-2807

Table D. HDSL FT1 Repeater Unit Specifications

Loop Interface
Modulation Type	2B1Q
Mode	Full Duplex, Echo Cancelling
Number of Pairs	One
Bit Rate	784 kbps per pair
Baud Rate	392K baud per pair
Service Range	Defined by Carrier Service Area Guidelines
Loop Loss	35.25 dB maximum @ 200 kHz
Bridged Taps	Single Taps < 2 kft, Total Taps < 2.5 kft
Performance	Compliant with Bellcore TA-NWT-001210
Return Loss	20 dB (40 kHz to 200 kHz)
HDSL Tx Signal Level	13.5 dBm
Input Impedance	135 Ω
Power
Input Power	(span-powered by FT1 DP) 3 W maximum
Tests
Diagnostics	Loopback initiated with DDS latching loopback codes.
	Self test initiated from FT1-DP or FNID.
Physical
Dimensions	6.36" long, 2.60" high, 0.7" deep
Weight	12 ounces
Environment		-40°C to +50°C
Temperature	Operating (Standard)
	Storage	-40°C to +85°C

Part Number

ADTRAN Single-Wide FT1 Repeater 1245211L1

6 Section 61245211L1-5, Issue 1 61245211L1-5A