3Com 3C510 manual Conﬁguring on, UNIX-based Platforms, Windows NT

Page 25

Configuring on UNIX-based Platforms 21

Windows NT

1From the Start menu, select Settings, and then Printers.

2Locate the icon that corresponds to the printer connected to the gateway. Right-click the icon, and then select Properties.

3Select Ports, and then select PRTmate: (All-in-1) from the Print To the following

port: list.

Be sure that the printer driver is the correct driver for your the printer.

4Click Conﬁgure Port. Enter the IP address of the gateway and then click OK.

5Make sure that all settings mentioned above are correct and then click OK.

Conﬁguring on	Follow the traditional conﬁguration procedure on UNIX platforms to setup the
UNIX-based Platforms	print server of this product. The printer name is “lp.”

Image 25

Contents Home Ethernet Gateway User Guide Santa Clara, California Contents Print Server Home Ethernet Welcome to Home NetworkingGateway Using This Guide Kit ContentsPanel Layout Hardware InstallationLeft Side Panel Top Panel The top panel of the gateway contains 6 LEDsCable or DSL Modem Connection Analog or Isdn Modem Connection Self-Test PhaseNetwork Settings Network SettingsIf the following message appears Setup Program Internet Sharing SetupInternet Sharing Setup Dynamic IP Address PPP Over Ethernet Static IP AddressDial-up Network Virtual Server Choose a value from the Maximum Serial Port Speed list boxSetup Program Internet Sharing Setup Reboot Change PasswordRestore to Default Firmware UpgradeDMZ Host Dhcp ServerRemote Administrator Host Conﬁguring Printer Properties Print ServerUNIX-based Platforms Conﬁguring onWindows NT Print server of this product. The printer name is lpConsole Mode Glossary Glossary Dhcp Index3Com Corporation Limited Warranty Included Services Industry Canada 3COM END User Software License Agreement Product Registration