Adaptec ATA II 1420SA, ATA II 1220SA, ATA II 1430SA manual Copyright

Page 2

2

Copyright

©2006 Adaptec, Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written consent of Adaptec, Inc., 691 South Milpitas Blvd., Milpitas, CA 95035.

Trademarks

Adaptec, Adaptec Storage Manager, SCSISelect, SATASelect, SerialSelect and the Adaptec logo are trademarks of Adaptec, Inc., which may be registered in some jurisdictions.

Microsoft and Windows are trademarks of Microsoft Corporation in the US and other countries, used under license.

Red Hat is a trademark of Red Hat, Inc. in the US and other countries, used under license.

Novell and NetWare are trademarks of Novell, Inc. in the US and other countries, used under license.

All other trademarks are the property of their respective owners.

Changes

The material in this document is for information only and is subject to change without notice. While reasonable efforts have been made in the preparation of this document to assure its accuracy, Adaptec, Inc. assumes no liability resulting from errors or omissions in this document, or from the use of the information contained herein.

Adaptec reserves the right to make changes in the product design without reservation and without notification to its users.

Disclaimer

IF THIS PRODUCT DIRECTS YOU TO COPY MATERIALS, YOU MUST HAVE PERMISSION FROM THE COPYRIGHT OWNER OF THE MATERIALS TO AVOID VIOLATING THE LAW WHICH COULD RESULT IN DAMAGES OR OTHER REMEDIES.

Image 2
Contents Serial ATA II 1430SA, 1420SA, 1220SA HostRAID Controllers Copyright Adaptec Customer Support Limited 3-Year Hardware Warranty Regulatory Compliance Statements Contents Installing the HostRAID Controller Disk Drives Understanding Adaptec Storage Manager Safety Information About This Guide Terminology Used in this Guide How to Find More InformationWhat You Need to Know Before You Begin About Your HostRAID Controller Upgrading the HostRAID Controller Firmware HostRAID Controller FeaturesArray Level Features About the Adaptec 1430SA Controller About the Adaptec 1420SA Controller About the Adaptec 1220SA Controller Kit Contents System Requirements Kit Contents System RequirementsGetting Started Selecting Cables Choosing a RAID LevelSelecting Disk Drives Disk Drives for Your ControllerInstalling with an Operating System Installation OptionsBasic Installation Steps Installing on an Existing Operating SystemInstalling the HostRAID Controller Disk Drives Installing the HostRAID Controller Before You BeginChecking Your Controller and Devices Connecting Disk Drives to Sata HostRAID ControllersDetermining the Boot Controller Next StepsCreating a Bootable Array Creating an Array with the ACU Setting the Boot ControllerCreating an Array Select Express configuration..., then click Next Creating an Array with Adaptec Storage ManagerMaking Your Array Bootable Installing the Driver An Operating System Installing with Windows Creating a Driver DiskInstalling with Red Hat Linux Installing with Suse LinuxInstalling with NetWare Installing the Driver on an Existing Operating System Installing on Windows Installing on Red Hat or Suse Linux Installing on NetWareManaging Your Storage Space About Adaptec Storage Manager Installing Adaptec Storage ManagerAbout the Hrconf Command Line Utility Which Utility Should I Use? About the ARC UtilityAbout the AFU Understanding Adaptec Storage Manager Features OverviewLogical Devices View Changing How Drives are DisplayedPhysical Devices View Collapsed and Expanded Views Component Views Solving Problems Failed Disk Drive Protected by a Hot Spare Troubleshooting ChecklistRecovering from a Disk Drive Failure Disk Drive Failure in a RAID 0 Array Failed Disk Drive Not Protected by a Hot SpareFailure in Multiple Arrays Simultaneously Multiple Failures in the Same ArrayUnderstanding RAID Understanding Drive Segments Selecting a RAID Level and Tuning PerformanceRAID Technology Overview Stripe-unit SizeRAID 0 Non-RAID Arrays RAIDRAID 1 Arrays RAID 10 ArraysUsing the ARC Utility Creating and Managing Arrays Introduction to the ARC UtilityRunning the ARC Utility Creating a New ArrayRAID Managing Arrays Rebuilding ArraysForce from Offline Adding/Deleting Hotspares Managing Bootable Arrays and DevicesConfiguring Disk Drives Using SATASelect Atapi SupportSATASelect Options SmartFormatting and Verifying Disk Drives Using the AFU for DOS Compatibility IntroductionSystem Requirements Running the AFU from the Command Line Running the AFU from the GUISave Update AFU Command Line Step-by-Step Command SwitchesAfu update /C controllernumber Safety Information Electrostatic Discharge ESDTechnical Specifications Current Requirements Environmental SpecificationsDC Power Requirements Glossary See channel Initialize See configure Mirrored array/mirroring See RAID 1, RAID Area on each disk reserved for use by the RAID controller See simple volume, spanned volume Index Scsi Adaptec, Inc