Adaptec Comprehensive Guide to Network Card Features and Configurations

Page 72

Glossary 90

disk ID

Unique disk identifier that consists of the channel number, SATA ID. For example, (channel:ID:LUN) 1:04:0. See channel.

drive LED

Disk indicator LED that illuminates during read or write operations.

E

event

Notification or alert from the system, indicating that a change has occurred.

event log

File used to maintain information about prior controller activities or errors.

event notification

Process for transmitting events.

F

failed

State of a nonredundant array that has suffered a single drive failure, or a redundant array that has suffered multiple drive failures. A failed array is inaccessible and data is lost.

fault-tolerant array

Refers to an array that can continue to function after a disk drive failure without loss of data. Fault tolerant, or redundant arrays, include RAID 1 arrays. See redundant.

foreign disk

Disk that has previously been configured on another Adaptec RAID controller. The RAID signature on the disk allows the RAID controller to identify whether or not the disk was configured on the controller it is currently connected to.

H

hard disk drive

Basic unit of nonvolatile, nonremovable, magnetic storage media. See disk.

hot spare

A spare hard disk that automatically replaces a failed hard disk on any array associated with any HBA.

hot swap

To remove a component from a system, and install a new component while the power is on and the system is running.

I

impacted

An impacted array is one which has been created but for some reason the initial build operation did not complete. All member drives are present and operational, and all data written to the array is protected. To optimize the array, run a Verify with Fix Task.

initialize See configure.

Image 72
Contents Serial ATA II 1430SA, 1420SA, 1220SA HostRAID Controllers Copyright Adaptec Customer Support Limited 3-Year Hardware Warranty Regulatory Compliance Statements Contents Installing the HostRAID Controller Disk Drives Understanding Adaptec Storage Manager Safety Information About This Guide How to Find More Information What You Need to Know Before You BeginTerminology Used in this Guide About Your HostRAID Controller HostRAID Controller Features Array Level FeaturesUpgrading the HostRAID Controller Firmware About the Adaptec 1430SA Controller About the Adaptec 1420SA Controller About the Adaptec 1220SA Controller Kit Contents System Requirements Kit Contents System RequirementsGetting Started Choosing a RAID Level Selecting Disk DrivesSelecting Cables Disk Drives for Your ControllerInstallation Options Basic Installation StepsInstalling with an Operating System Installing on an Existing Operating SystemInstalling the HostRAID Controller Disk Drives Installing the HostRAID Controller Before You BeginConnecting Disk Drives to Sata HostRAID Controllers Determining the Boot ControllerChecking Your Controller and Devices Next StepsCreating a Bootable Array Setting the Boot Controller Creating an ArrayCreating an Array with the ACU Select Express configuration..., then click Next Creating an Array with Adaptec Storage ManagerMaking Your Array Bootable Installing the Driver An Operating System Installing with Windows Creating a Driver DiskInstalling with Red Hat Linux Installing with Suse LinuxInstalling with NetWare Installing the Driver on an Existing Operating System Installing on Windows Installing on Red Hat or Suse Linux Installing on NetWareManaging Your Storage Space Installing Adaptec Storage Manager About the Hrconf Command Line UtilityAbout Adaptec Storage Manager About the ARC Utility About the AFUWhich Utility Should I Use? Understanding Adaptec Storage Manager Features OverviewChanging How Drives are Displayed Physical Devices ViewLogical Devices View Collapsed and Expanded Views Component Views Solving Problems Troubleshooting Checklist Recovering from a Disk Drive FailureFailed Disk Drive Protected by a Hot Spare Failed Disk Drive Not Protected by a Hot Spare Failure in Multiple Arrays SimultaneouslyDisk Drive Failure in a RAID 0 Array Multiple Failures in the Same ArrayUnderstanding RAID Selecting a RAID Level and Tuning Performance RAID Technology OverviewUnderstanding Drive Segments Stripe-unit SizeRAID 0 Non-RAID Arrays RAIDRAID 1 Arrays RAID 10 ArraysUsing the ARC Utility Introduction to the ARC Utility Running the ARC UtilityCreating and Managing Arrays Creating a New ArrayRAID Managing Arrays Rebuilding ArraysForce from Offline Managing Bootable Arrays and Devices Configuring Disk DrivesAdding/Deleting Hotspares Using SATASelect Atapi SupportSATASelect Options SmartFormatting and Verifying Disk Drives Using the AFU for DOS Introduction System RequirementsCompatibility Running the AFU from the Command Line Running the AFU from the GUISave Update AFU Command Line Step-by-Step Command SwitchesAfu update /C controllernumber Safety Information Electrostatic Discharge ESDTechnical Specifications Environmental Specifications DC Power RequirementsCurrent Requirements Glossary See channel Initialize See configure Mirrored array/mirroring See RAID 1, RAID Area on each disk reserved for use by the RAID controller See simple volume, spanned volume Index Scsi Adaptec, Inc