Adaptec 1744 Using Fdisk, Load ASW-1410 v3.0a, Questions and Answers About Extended Translation

Page 53

EISA-to-Fast SCSI Host Adapter

Disk Drives Over 1 Gigabyte

Using Fdisk

To install a new disk, or to re-partition an existing disk, use the fdisk DOS utility as you normally would. The cylinder size in- creases to 8 MBytes when you enable extended translation. The size of the partition you request must therefore be a multiple of 8 MBytes. If you request a partition size that is not a multiple of 8 MBytes, fdisk will round up to the nearest whole multiple of 8 MBytes.

Load ASW-1410 v3.0a

Load ASW-1410 v3.0a for ASPI support of non-disk peripheral de- vices. The ASW-1410 v3.0a is fully compatible with extended translation in the AHA-1740A/1742A.

Questions and Answers About Extended Translation

What happens if I enable extended translation with SCSI drives that are less than 1 Gigabyte in capacity?

Drives handled by the BIOS will use extended translation pro- vided they are over 1 Gigabyte in formatted capacity. Drives with less than 1 Gigabyte of formatted capacity will use standard translation regardless of whether extended translation is enabled. Drives handled by the disk driver aspidisk.sys will continue to use standard translation and not be capable of DOS partitions over 1 Gigabyte.

What if I have more than two fixed disk drives on the AHA-1740A/1742A?

You can use up to seven fixed disk drives under the BIOS provided you are running DOS 5.0.

A-3

Image 53
Contents User’s Manual Page User’s Manual Copyright Iii Page Table of Contents Adaptec Glossary Index List of Tables List of FiguresPreface Bold ConventionsPage South milpitas blvd. ∙ milpitas, ca 95035 ∙408945-8600 General Product Information OverviewAdaptec EISA-to-Fast Scsi Host Adapter Overview AHA 1740A/1742A/1744 Program Files Installation SoftwareAHA 1740A/1742A/1744 Operation Modes Bios Operation ModesSystem Caching Description AHA-1740A/1742A/1744 Product Specifications Product Specifications∙ Technical Reference Manual ∙ Installation GuideAssociated Documentation Unpacking and Inspection Hardware InstallationPreparation Scsi Device Termination Scsi TerminatorsScsi ID Scsi ParityPhysical Installation in the System Adaptec Multiple Host Adapter Support Standard ModeEnhanced Mode Standard and Enhanced Modes Running the ADL Program Adaptec Download UtilityHost Adapter Listing ADL Main Menu Download Firmware Screen Download FirmwareDownload Warning Message Screen Firmware Information Enhanced Mode Firmware InformationLow-Level Format Device Selection Screen Low-Level FormatLow-Level Format Option Selection Screen Low-Level Format Options screen displaysExiting the ADL Program Exiting the ADL ProgramPage Standard Mode Operation Host Adapter Bios OperationAdaptec Enhanced Bios Boot Message Enhanced Mode OperationBoot Message With Error Detection Enabled Determining Problems Using the LED TroubleshootingAHA 1740A/1742A/1744 LED Flash Codes Problems Detected During InstallationEISA-to-Fast Scsi Host Adapter Troubleshooting Problems Using a Scsi and a Standard Disk Drive Problems Booting the System from a Scsi DriveProblems Using Two Scsi Drives Adaptec DOS 1 Gigabyte Limit Extended Translation Using DOSDisk Drives Over 1 Gigabyte Drives With Mixed Partitions When to Use Extended Translation With DOS Version 5 OnlyUsing Extended Translation Load ASW-1410 v3.0a Using FdiskQuestions and Answers About Extended Translation Adaptec DOS/Windows Loading the I/O Operating Environment SoftwareUnix Novell NetWareOS/2 Glossary Command Control Block Bus Device ResetCommand Descriptor Block Asynchronous Event NotificationConfiguration Common Command SetDirect Memory Access Control MicroprocessorHost Enhanced ModeFirmware IBM PC-AT Compatible Host AdapterIndustry Standard Architecture InitiatorMailbox Out MailboxManager Multi-tasking OperationScsi Device Scatter/GatherSingle-Ended Single-Threaded OperationSynchronous Data Transfer Standard ModeSynchronous Data Transfer Negotiation Tagged QueuingIndex AHA-1740A/1742A/1744 Index-2 Index-3 AHA-1740A/1742A/1744 Index-4