Actiontec electronic HPE400T Frequently Asked Questions, Will the Hub work in any home?

Page 17

Actiontec MegaPlug 4-Port Hub User Manual

The Power and Link lights are on, but I can’t access the router/gateway from the computer

sTry plugging the Hub in different power outlets.

sMake sure all Hubs on the network are using the same security parameters.

Frequently Asked Questions

What’s the transfer speed over the Hub’s network?

The Hub’s network transfer speed is 85 Mbps (maximum) over a standard home power line network.

What’s the estimated range of the Hub’s network?

Approximately 300 meters (~985 ft.) in wall power lines (one household).

Will the Hub work in any home?

The Hub will work in any home with built-in copper wiring. It may not operate in some older homes (pre-1950) with alternate wiring.

Will the Hub’s network signal pass through circuit breakers?

Yes, the Hub’s network signal will pass through circuit breakers. It will not, how- ever, pass through power transformers.

Does the Hub work with a 100 – 240V AC input ?

Yes.

Does using the Hub cause any interference with other home networking devices?

No. The Hub operates at a different frequency than other power line control devices and can co-exist with technologies such as X-10, CEBus, and LONworks.

14

Image 17
Contents MegaPlug Ethernet Adapter Table of Contents This page left intentionally blank Introduction1 Package ContentsSystem Requirements FeaturesGetting to Know the 4-Port Hub Power LightAC in Port Technical SupportConnecting the Hub Connecting MegaPlug HubInstalling the Configuration Utility Connecting the MegaPlug Hubs This page left intentionally blank Quick Setup Using Configuration UtilityAdvanced Using the Configuration Utility About Troubleshooting TroubleshootingWill the Hub work in any home? Frequently Asked QuestionsHow many Hubs do I need to set up a network? This page left intentionally blank Windows 98 SE Setting Up Static IP AddressPage 192.168.0.2 Windows Me Setting Up Static IP Address Do not include the periods they are automatically entered Windows Page Setting Up Static IP Address Enter the following numbers in the IP Address text box Windows XP Page Setting Up Static IP Address 192.168.0.2 File Sharing Setting Up File Printer SharingPage Windows Page Setting Up File and Printer Sharing Page Click OK. a System Settings Change window appears. Click Yes Page Printer Sharing Page General Specifications aEnvironmental LED IndicatorsGlossary Access PointPage Ssid This page left intentionally blank Modifications Regulatory Compliance NoticesMiscellaneous Legal Notices Limited Warranty Actiontec Electronics, Inc North Mary Avenue Sunnyvale, CA Limited Warranty