Actiontec electronic HPE400T user manual

Page 37

Actiontec MegaPlug 4-Port Hub User Manual

4.The “Identification Changes” window appears. In the “Computer Name” text box, type a name different than the other computers on the network.

5.In the “Workgroup” text box, enter the network workgroup name. This is the same on each computer on the network.

6.Click OK.

7.Click OK again.

8.Restart the computer.

34

Image 37

Contents MegaPlug Ethernet Adapter Table of Contents This page left intentionally blank Introduction1 Package ContentsSystem Requirements FeaturesGetting to Know the 4-Port Hub Power LightAC in Port Technical SupportConnecting the Hub Connecting MegaPlug HubInstalling the Configuration Utility Connecting the MegaPlug Hubs This page left intentionally blank Quick Setup Using Configuration UtilityAdvanced Using the Configuration Utility About Troubleshooting TroubleshootingWill the Hub work in any home? Frequently Asked QuestionsHow many Hubs do I need to set up a network? This page left intentionally blank Windows 98 SE Setting Up Static IP AddressPage 192.168.0.2 Windows Me Setting Up Static IP Address Do not include the periods they are automatically entered Windows Page Setting Up Static IP Address Enter the following numbers in the IP Address text box Windows XP Page Setting Up Static IP Address 192.168.0.2 File Sharing Setting Up File Printer SharingPage Windows Page Setting Up File and Printer Sharing Page Click OK. a System Settings Change window appears. Click Yes Page Printer Sharing Page General Specifications aEnvironmental LED IndicatorsGlossary Access PointPage Ssid This page left intentionally blank Modifications Regulatory Compliance NoticesMiscellaneous Legal Notices Limited Warranty Actiontec Electronics, Inc North Mary Avenue Sunnyvale, CA Limited Warranty