Actiontec DSL Gateway User Manual
3.Follow the instructions in the “Set Up/Configuration” screen, then click Begin Basic Setup.
4.In the next window, follow the
5.In the next screen, indicate whether the user is using MSN (Microsoft Network) by clicking in the appropriate circle. Then, select the type of connection pro- vided by the ISP by clicking in the circle next to PPPoA or PPPoE. If unsure about the selection, check the information provided by the ISP. Finally, enter the User Name and Password provided by the ISP.
Note: If you obtained a block of static IP addresses, see Chapter 4, “Advanced Setup,” to configure the Gateway.
10