Actiontec electronic GT704WG-QW04 user manual Telnet Timeout Setting, LAN IP Address

Page 48

Chapter 4 Configuring Advanced Settings

Telnet Timeout Setting

Selecting Telnet Timeout Setting in the “Advanced Settings” screen generates the “Telnet Timeout Setting” screen. In this screen, select the amount of idle time before a telnet session is automatically terminated by activating the appropriate radio button.

LAN IP Address

Selecting LAN IP Address in the “Advanced Settings” screen generates the “LAN IP Address” screen.

The values in the “LAN IP Address” and “Netmask” text boxes are the IP address and subnet mask address of the Gateway as seen on the network. These values can be modified for your LAN network, but Actiontec recommends keeping the default factory settings (IP address - 192.168.0.1; subnet mask - 255.255.255.0).

Note: If the Gateway’s LAN IP Address is modified, verify the DHCP Server range is within the same subnet. For more information, see “DHCP Server Configuration.”

After changing settings, click Next or Back to continue, or Save and Restart to make all changes permanent.

45

Image 48

Contents Wireless DSL Gateway Table of Contents Troubleshooting Reference SpecificationsGlossary Firewall Security Level Services Static IP Address on the ComputerPackage Contents Introduction1Minimum System Requirements Features Getting to Know the Gateway Power Light DSL LightInternet Light Ethernet LightsWireless Light USB LightPhone Port USB PortReset Switch Power PortPower Switch Other ProblemsWired/Wireless Upgrade Page Performing a Basic Setup Basic SetupTo configure the Gateway for basic operation Page Changing the User Name and Password Click Save and Restart in the Save and Restart screenClick Save and Restart at the bottom of the screen Setting Up Static IP Address Configuring for a Single Static IP AddressPage Setting Up Static IP Page Click Save and Restart at the bottom of the screen Configuring for a Block of Static IP Addresses Setting Up Static IP Page Dhcp Server Configuration screen, select Static from Click Save and Restart from the menu on the left sideClick Save and Restart at the bottom of the screen Configuring4 Advanced Settings Accessing Advanced SettingsWAN IP Address Transparent Bridging Obtain an IP Address through PPPoE or PPPoA PPP Auto ConnectEncapsulation PPPoA only Save & ApplySpecify a Static IP Address Wireless Settings Channel OffWEP WEP+802.1x WPA Wireless MAC Authentication Wireless Advanced SettingsDhcp Server Dhcp Server Configuration Beginning IP Address, Ending IP AddressDNS Dynamic or Static DNS ServerServices Blocking Website Blocking Remote Management/TelnetPort Forwarding To remove forwarded ports, highlight them, then click RemoveDMZ Hosting Clicking Advanced brings up the Advanced Port Forward screenFirewall Dynamic RoutingNAT Network Address Translation Static RoutingIP QoS Setting Source Telnet Timeout Setting LAN IP AddressThis page left intentionally blank Accessing Status To access the Status screens, follow these instructionsViewing Gateway’s Status Current Status Viewing the Gateway’s Status WAN Status LAN Status Dhcp User ListPage Using Utilities Web Activity LogDSL Settings Restore Default Settings Upgrade FirmwareThis page left intentionally blank Troubleshooting LAN Connection FailureCannot Connect to the Internet CMD Time out error occurs when entering a URL or IP Address This page left intentionally blank Reference Locating Computer InformationLocating Windows Operating System Files Appendix a Reference Click Search Static IP Address On the Computer Windows 98 SEPage 192.168.0.2 Windows Me Appendix b Static IP on the Computer Do not include the periods they are automatically entered Windows Page Appendix b Static IP on the Computer Enter the following numbers in the IP Address text box Windows XP Page Appendix b Static IP on the Computer Enter the following address in the IP Address text box Comparing DSL Service with a Dial-Up Modem Computer SecurityModem Security Computer SecurityInternet Browsers Electronic Security This page left intentionally blank Specifications D GeneralWAN PPP, DHCP, Static IP Full-rate Adsl InterfaceWireless Operating Range LED IndicatorsPower, DSL, Internet, Ethernet, USB, Wireless EnvironmentalAccess Point GlossaryPage Ssid This page left intentionally blank Firewall Security Level Services Medium Security Level Low Security Level Service Acronym Definitions Real audio/video Icmp323 120Regulatory Compliance Notices ModificationsClass B Equipment Miscellaneous Legal Notices All other names are the property of their respective owners