ADC MetroNID, EtherNID manual Service Mapping, Bandwidth Policing, Zero-Latency Traffic Shaping

9 / 0 8 • 1 0 7 0 3 3 A E   LoopStar® EtherNID™ – LoopStar® MetroNID™

LoopStar® EtherNID™ – LoopStar® MetroNID™

ADC's network interface devices for Ethernet and IP networks

Service Creation and Traffic Conditioning

Service Mapping

Create E-Line, E-LAN & E-Tree services directly at the demarc point -service mapping applies C/V-LAN tags (selective push) and/or configurable service class to traffic meeting detailed layer 2,3 & 4 criteria.

Bandwidth Policing

Limit upstream and downstream CIR/EIR by filtering criteria or for all traffic. Facilitates Carrier Ethernet service provisioning and on-demand/incremental service upgrades.

Zero-Latency Traffic Shaping

Pre-conditioning of traffic to accelerate services and optimize access link bandwidth use. Passes highest- priority traffic without added delay or jitter while other traffic is buffered until capacity is available.

Wire-speed Filtering

Filter wire-speed traffic at layer 1-2-3-4 (L2CP, BDPU, per VLAN, Ethertype, Protocol type, MAC, IP, User Defined).

4-to-1 Multi-Port Aggregation

Latency-free, multi-port aggregation from 4 Fast Ethernet ports to a single GbE. De-aggregate by VLAN, or any combination of Layer 2 -4 frame criteria.

General Functionality

Jumbo Frames Support: All functions supports Jumbo Frames up to 10,240 bytes at all rates (10/100/1000 Mbps).

3 –Way Redundant Power: Units can be powered using 5VDC, or dual -48V feeds, all mutually redundant.

SNMP v1 & v2c: Support SNMP v1 and v2c for monitoring, alarms, OSS integration and unit configuration.

Embedded GPS: Optional feature, can be used as clock reference in place of the patent-pending synchronization method normally used for 1-way delay & jitter measurements.

w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 5