Juniper Networks 8 Power Input Module Cables and Wires Needed Cable/Wire From, ERX-14xx models

Cabling ERX Routers

Table 9: Power Input Module Cables and Wires Needed

Cable/Wire	From	To
ERX-14xx models
One 10-AWG ground wire	Power input module ground terminal	Termination ground
Two 8-AWG wire leads	Power input module Power A –48 VDC	Appropriate leads on power source No.1
	and RTN leads
Two 8-AWG wire leads	Power input module Power B –48 VDC	Appropriate leads on power source No.2
	and RTN leads
ERX-7xx models
One 10-AWG ground wire	Power input module ground terminal	Termination ground
Two 12-AWG wire leads	Power input module Power A –48 VDC	Appropriate leads on power source No.1
	and RTN leads
Two 12-AWG wire leads	Power input module Power B –48 VDC	Appropriate leads on power source No.2
	and RTN leads
ERX-310 router
One 10-AWG ground wire	Power input module ground terminal	Termination ground
Two 14-AWG wire leads (DC model only)	Power input module Power A –48 VDC	Appropriate leads on power source No.1
	and RTN leads
Two 14-AWG wire leads (DC model only)	Power input module Power B –48 VDC	Appropriate leads on power source No.2
	and RTN leads
One AC power cord (AC model only)	Power input module AC power IEC	Appropriate AC power supply
	receptacle

Cabling the Router for Power 61