Adder Technology SV2 Using the SmartView, Power on status, Front panel key and remote controller

Page 17

3. Using the SmartView

This section explains the general operation of the SmartView. We recommend that you read this section before starting to use the product.

3.1 Power on status

At power on the SmartView selects PC number 1 and displays '1'. If a password has been set then ‘P’ will be displayed and the SmartView will remain locked until a valid password is entered.

3.2 Front panel key and remote controller

The front panel key is used to select which channel is currently connected to the shared keyboard, mouse and monitor. It is also used to enter configuration mode (see section 2.5). Pressing the key during normal operation will cause the next channel to be selected. For the 2 port SmartView this cycles around ports 1 and 2. For the 4 port SmartView this cycles around ports 1, 2, 3 and 4.

An optional remote controller is also available which replicates the front panel button and display, but can be located remotely from the SmartView. This is particularly useful in applications where the SmartView is located away from the desktop. The remote controller can be conveniently attached to your keyboard with a couple of Velcro strips to give instant channel information and key control.

3.3 Status display

The status display usually shows the currently selected port. If autoscan mode is selected, the segments will illuminate in sequence in a clockwise direction interspersed with a display of the currently selected channel. If SmartView has been locked, ‘P’ will be displayed until a valid password has been typed to unlock the unit. Data flow from the mouse or keyboard causes the dot to flash.

SmartView

Installation and Use

Page 16

Image 17
Contents SMARTView About this manual Safety informationWarranty European EMC directive 89/336/EEC Radio Frequency EnergyContents Appendices SmartView configuration optionsIntroduction Key featuresProduct information Package contentsSmartView SV2 version supporting 2 PCs What you will need InstallationMounting the SmartView Connecting your devicesConfiguring the SmartView Configuring your PCsH2e Ee Summary of SmartView configuration optionsSmartView Installation and Use Re-enabling a disconnected PS/2 mouse Other useful installation informationSmartView Installation and Use SmartView Installation and Use Power on status Using the SmartViewFront panel key and remote controller Status displayKeyboard hotkey control SmartView Installation and Use Cascading SmartViews Mouse controlRS232 control SmartView Installation and Use Display options SmartView configuration optionsScreen saver time delay Autoscan lock on mode and delay time Mouse mode and mouse switching of channels Keyboard hotkey combination Setting a security password Firmware functions version query, mouse restore and resetCycling between all channels or just the active channels Exit configure modeCascade query code A2. SmartView to PCs 1 to Appendix A. Cable and connector specificationsA1. Keyboard, monitor and mouse to SmartView A3. Expansion port pin assignments SmartView 4 port only Appendix B. Problem Solving Mouse causes channel to change SmartView Installation and Use SmartView Installation and Use SMARTView
Related manuals
Manual 34 pages 42.4 Kb