3 features overview
CPXTM owner’s manual
0 Conn. Mode Select Switch
Depressing the rear panel CONN. MODE select switch connects both input connectors together in parallel. This directs the same input signal to both channels and allows one connector to be used with a patch cable to drive another amplifier. In the OUT position, both input connectors operate independently. Do not operate the CONN. MODE select switch with the amplifier powered on. See the sections on Stereo, Parallel and Bridged Mono Mode for more information.
¡Amp Mode Select Switch
The rear panel AMP MODE select switch determines if the amplifier is in stereo (two channels) or in Bridged Mono Mode. Do not operate the AMP MODE select switch with the amplifier powered on. See the Operations Mode section for more information on Stereo, Parallel and Bridged Mono Mode applications.
p.20