Crest Audio CPX 3800 owner manual Setup c, Glossary of terms for setup

setup c

glossary of terms (for setup)

Stereo	Music with two separate channels, usually a left and right
	channel.
Mono	Music with only one channel.
Crossover	An electronic device that separates high and low
	frequencies and sends them to different outputs. The sepa-
	rate signals are usually sent to a high out and a low out.
Bi-amp	The separation of high and low frequencies with a cross-
	over, using separate speakers and power amps for each.
Full Range	Both high and low frequencies together in a single channel.
Program	The signal that is plugged into the amplifier.
Hi-Pass	Allows only the high frequencies to pass, blocking the low
	frequencies.
Low-Pass	Allows only the low frequencies to pass, blocking the high
	frequencies.
Mid/High	The speaker designed to play everything but the low
	frequencies.
Sub	The speaker designed for low frequencies only.
Parallel	Both speakers or inputs have the same signal. When
	referring to speakers, this means plugging the second
	speaker into the first speaker and so on.

p.33