5protection features
CPXTM owner’s manual
turn-on/turn-off protection
At
AUTORAMP™ signal control
Whenever a CPX Series amplifier powers up or comes out of a protect mode, the AUTORAMP circuit acti- vates. While the speakers are disconnected, the AUTORAMP circuit fully attenuates the signal and activates the GCL LED. After the output relay closes, the signal slowly and gradually raises to its set level.The PWR LED will illuminate and the GCL LED will turn off when the signal is no longer attenuated.The AUTORAMP Signal Control circuit has some important advantages over conventional
1.If a signal is present during
2.Because the gain is reduced until after the output relay closes, no arcing occurs at the contacts.This extends the contacts’ useful life.
p.26