3.HARDWARE SETUP
13)IrDA-Compliant Infrared Module Connector (5-pin IR)
This connector supports the optional wireless transmitting and receiving infra- red module. This module mounts to a small opening on system cases that sup- port this feature. You must also configure the setting through UART2 Use In- frared (see 4.4.2 I/O Device Configuration) to select whether UART2 is di- rected for use with COM2 or IrDA. Use the five pins as shown in Back View and connect a ribbon cable from the module to the motherboard according to the pin definitions.
Front View | Back View |
3. H/W
Connectors
+5V | IRRX | IRTX |
(NC) |
| GND |
IRTX
GND
+5V
(NC)
IRRX
SETUP
14)Internal Audio Connectors
Mono Input
Ground
Ground
Mono Output
MODEM
Left Audio Channel
Ground
Ground
Right Audio Channel
CD_IN
Left Audio Channel
Ground
Ground
Right Audio Channel
CDROM_AUDIO
26 | ASUS |