D-Link DWA-556 manual Configure WPA/WPA2, Using the D-Link Wireless Connection Manager

Page 35

Section 4 - Wireless Security

Configure WPA/WPA2

Using the D-Link Wireless Connection Manager

WPA and WPA2 are for advanced users who are familiar with using a RADIUS server and setting up certificates.

1.Open the Wireless Connection Manager by double-clicking on the D-Link icon on your desktop. Click on New to create a new profile or highlight an existing profile and click Modify.

2.Select WPA/WPA2 under Set Security Option and then select TKIP or AES.

3.Click on Advanced Config to continue.

4.Next to EAP Type, select EAP-TLS, EAP-TTLS, or PEAP. Extensible Authentication Protocols allow devices on the network to request authentication from the RADIUS server in the network. All the devices on the network must use the same EAP type when using a RADIUS server for authentication. Some RADIUS servers require that the Validate Server field be selected. Check this field if your RADIUS server requires validation.

5.Select an User Certificate from the drop-down menu.

6.Enter the login information required to authenticate.

7.Click Add to enter the IP address(es) of your RADIUS servers.

8.Click OK to save your settings.

D-Link DWA-556 User Manual

35

Image 35
Contents Page Table of Contents ProductPackageOverviewContents Introduction Features LEDs Hardware OverviewGetting Started InstallationRemove Existing Installations Properties Disable Other Wireless AdaptersDisable Installation Wireless Installation Considerations Click Install Drivers Adapter InstallationInstallation Click Continue Anyway Installation Double-click the Wireless Connection ConfigurationLink Wireless Connection Manager Wireless Networks New Button Modify Delete Activate My Wireless NetworksAdd Profile Modify Profile Support About Windows XP Configuration Utility Disabling The Windows XP Utility Choose a Wireless Network window click ChangeConfiguration What is WEP? Wireless SecurityWhat is WPA? Using the D-Link Wireless Connection Manager Configure WEPSelect WEP under Set Security Option Using the Windows XP Utility Wireless Security Configure WPA/WPA2 Passphrase Select WPA/WPA2 Passphrase under Set Security Option Using the Windows XP Utility Wireless Security Configure WPA/WPA2 Troubleshooting Right-click on D-Link DWA-556 Wireless Desktop Adapter Forgot my encryption key Cannot connect to the access point or the wireless routerDWA-556 Power and Link lights are not on Uncheck Hide extension for known file types click on Apply Computer does not recognize the DWA-556 Wireless AdapterHow can I troubleshoot distance issues using the DWA-556? Wireless Basics Wireless Local Area Network Wlan What is Wireless?Small Office and Home Office Wireless Personal Area Network WpanHome Eliminate Interference Centralize your router or Access PointSecurity Wireless ModesCheck your IP address Networking BasicsStep Highlight Internet Protocol TCP/IP and click Properties StepDimensions Technical SpecificationsPhone Support Contacting Technical SupportLimited Warranty WarrantyNon-Applicability of Warranty Limited Software WarrantyDisclaimer of Other Warranties What Is Not CoveredCopyright Statement Limitation of LiabilityGoverning Law TrademarksFCC Statement CE Mark WarningImportant Note Registration