Bosch Appliances 3122 475 22015en manual Mounting an interface module in the transmitter housing

Page 23

INTEGRUS Installation and User Instructions Integrus Transmitters

en 17

 

 

2.2.2Mounting an interface module in the transmitter housing

Warning: Before opening the transmitter housing, make sure that the mains power and all other connections are disconnected!

Warning: ICs and many other electronic components are susceptible to electrostatic discharge (ESD). Take preventive measures when handling the interface modules. Keep the PCBs as long as possible in their pro- tective packing. Wear an anti-ESD bracelet.

Warning: To prevent damage to the PCB connectors (4), be sure that the connec- tors are aligned properly before pushing the module in.

1

2

Figure 2.5 Interface module slot cover

Follow the instructions below to mount an interface module in the transmitter housing. The numbers refer to figure 2.5 and figure 2.6.

1.Remove the top cover of the transmitter housing.

2.Remove the interface module slot cover (1) at the back of the transmitter. Keep the screws (2).

3.Insert the module (3) (with the components faced down) into the transmitter housing and push it firm- ly into the PCB connector (4).

4.Fasten the slot cover (5) to the back of the transmit- ter housing. Use the screws (2) from step 2.

5.Fasten the module’s PCB to the distance studs (6). Use the screws (7) provided with the interface module.

6.Close the transmitter housing.

 

2

5

 

 

 

 

3

4

 

7

 

 

6

Figure 2.6 Mounting an interface module in the transmitter housing

Bosch Security Systems 2005-04 3122 475 22015en

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Integrus Important Safeguards Table of contents Integrus Installation and User Instuctions Table of contents Bosch Security Systems 2005-04 3122 475 22015en Integrus Installation and User Instructions System overview System description and planningQuality modes Signal ProcessingSystem technology IR radiationFootprint of the radiator Aspects of infra-red distribution systemsCarriers and channels Directional sensitivity of the receiverRadiator mounted at 45 to the ceiling Ambient lightingPositioning the radiators 11 Infra-red signal blocked by a person in frontOverlapping footprints and multipath effects 14 Combination of several reflected signalsRectangular footprints Planning an Integrus infra-red radiation systemCabling Planning radiatorsSystem with one transmitter Setting the radiator delay switches20m System with two or more transmitters in one room Calculation of the master-to-slave signal delays Testing the coverage area Interference from IR systems Description Integrus TransmittersIntegrus DCN interface module Audio interface modulesInterface module slot cover Mounting an interface module in the transmitter housingRemoving the main PCB and the rear panel Upgrading an LBB4502/xx to an INT-TXRemoving the main PCB and the rear panel steps 1 Installation of the INT-TXKInstallation of the INT-TXK steps 1 Connections Connecting the DCN systemConnecting the DCN Next Generation Connecting other external audio sourcesConnecting to another transmitter Connecting an emergency signalOverview Using the configuration menuTo navigate through a sub-menu Navigate through the menuTo navigate through the Main menu To jump to a sub-menuTo jump back from a sub-menu to an item of the Main menu ExamplesExample 1 Disable carrier 2. See also section Turn to move the cursor Required channel num Setup Back View transmitter status Configuration and operationStart-up Main menuDCN View fault statusView version information Set monitoring optionsSet network mode Set transmission modeSet number of channels Set channel quality and assign inputs to channels Per Channel Settings Set channel names View carrier assignments Disable or enable carriersConfigure auxiliary inputs Set sensitivity of the inputs Enable / disable IR-monitoringEnable / disable headphone output Per Input Sensitivity settingsChoose transmitter name Reset all options to factory default valuesDescription Medium and High Power RadiatorsIntegrus Radiators Attaching the suspension bracket Radiator status indicationMounting the radiators Wall mounting Mounting on a floor standMounting on horizontal surfaces Connecting radiators to the transmitterCeiling mounting Using the output power selection switch Low Power Wide Beam RadiatorLimitations Mounting the RadiatorIntegrus Receivers Operation Reception test modeReceiver headphones LBB 4560 Charging unit Integrus Charging UnitsWall mounting the charging cabinet Charging procedureTroubleshooting Integrus Installation and User Instructions Troubleshooting System Specification Technical DataTransmitters and Modules Radiators and AccessoriesTransmitter Upgrade Kit range Medium and High Power RadiatorsWall Mounting Bracket Receivers, Battery Packs and Charging UnitsLow Power Wide Beam Radiator NiMH Battery PackConnection details Guaranteed rectangular footprints Angle Product index

3122 475 22015en specifications

Bosch Appliances are synonymous with quality and innovation, and the model 3122 475 22015en showcases these attributes elegantly. This appliance combines advanced engineering with intuitive design, making it a valuable addition to any modern kitchen.

One of the standout features of the Bosch 3122 475 22015en is its efficiency. Designed to optimize performance while using minimal energy, this appliance is ideal for environmentally-conscious consumers. It complies with strict energy standards, ensuring that it not only delivers superior results but also helps in reducing household energy bills.

The appliance is equipped with cutting-edge technology that enhances its functionality. One significant innovation is the EcoSilence Drive, which ensures powerful performance with minimal noise. This makes the Bosch 3122 475 22015en an excellent choice for open-concept living spaces or homes where silence is valued.

Another noteworthy aspect is its PrecisionWash technology. This intelligent feature uses sensors to detect soil levels, adjusting the wash cycle for optimal cleaning power. This ensures that every dish, regardless of the load, comes out sparkling clean, thus providing peace of mind for users who value cleanliness.

The design of the Bosch 3122 475 22015en is sleek and modern, with a stainless-steel finish that complements contemporary kitchen aesthetics. Its ergonomic controls are intuitive and user-friendly, making operation straightforward even for those who are not technologically savvy.

In addition to its performance and aesthetics, safety is also a priority in the design of this appliance. It includes multiple safety features such as a Child Lock for added peace of mind, ensuring a safe environment for households with young children.

Furthermore, this model incorporates flexible loading options, including adjustable racks and foldable tines, allowing users to customize the interior space to accommodate various sizes and shapes of dishes. This adaptability maximizes utility and enhances user experience.

In conclusion, the Bosch Appliances 3122 475 22015en is a perfect blend of performance, efficiency, and innovative technology. With features like EcoSilence Drive and PrecisionWash, alongside a focus on safety and flexibility, it truly embodies Bosch's commitment to creating high-quality appliances that meet the needs of modern living. Whether you are an avid chef or simply enjoy hosting, this appliance is designed to make everyday tasks easier and more efficient.
Top Page Image Contents