Bosch Appliances 3122 475 22015en manual Mounting on a floor stand, Wall mounting

Page 50

INTEGRUS Installation and User Instructions Integrus Radiators

en 44

 

 

Mounting on a floor stand

The top of the floor stand is screwed into the suspen- sion bracket (figure 3.5). The bracket is supplied with both metric and Whitworth threaded plates, and is therefore compatible with most standard floor stands. For floor stands, the mounting angle can be set at 0°, 15° or 30°.

Wall mounting

For wall mounting, an extra wall bracket (LBB 3414/00) is required (must be ordered separately). This bracket is attached to the wall by means of four bolts (see figure 3.8). Four holes of 10 mm in diameter and 60 mm in depth must be drilled using the drilling pattern (see figure 3.7).

Note: The four bolts used to attach the bracket must each be able to withstand a pull-out force of 200 kg (440 lb).

The bolts and plugs delivered with the LBB 3414/00 wall bracket are only intend- ed for mounting the unit on a solid brick or concrete wall.

Figure 3.5 Attaching the stud of a floor stand to the suspension bracket of the radiator

Figure 3.7 LBB 3414/00 wall mounting bracket showing dimensions and drilling pattern

Figure 3.6 Attaching the radiator inclusive suspension bracket and stud to the floor stand

Bosch Security Systems 2005-04 3122 475 22015en

Page 49 Page 51
Image 50
Page 49 Page 51
Contents Integrus Important Safeguards Table of contents Integrus Installation and User Instuctions Table of contents Bosch Security Systems 2005-04 3122 475 22015en Integrus Installation and User Instructions System description and planning System overviewIR radiation Signal ProcessingSystem technology Quality modesDirectional sensitivity of the receiver Aspects of infra-red distribution systemsCarriers and channels Footprint of the radiatorAmbient lighting Radiator mounted at 45 to the ceiling11 Infra-red signal blocked by a person in front Positioning the radiators14 Combination of several reflected signals Overlapping footprints and multipath effectsPlanning an Integrus infra-red radiation system Rectangular footprintsPlanning radiators CablingSetting the radiator delay switches System with one transmitter20m System with two or more transmitters in one room Calculation of the master-to-slave signal delays Testing the coverage area Interference from IR systems Integrus Transmitters DescriptionAudio interface modules Integrus DCN interface moduleMounting an interface module in the transmitter housing Interface module slot coverUpgrading an LBB4502/xx to an INT-TX Removing the main PCB and the rear panelInstallation of the INT-TXK Removing the main PCB and the rear panel steps 1Installation of the INT-TXK steps 1 Connecting other external audio sources Connecting the DCN systemConnecting the DCN Next Generation ConnectionsConnecting an emergency signal Connecting to another transmitterUsing the configuration menu OverviewTo jump to a sub-menu Navigate through the menuTo navigate through the Main menu To navigate through a sub-menuExamples To jump back from a sub-menu to an item of the Main menuExample 1 Disable carrier 2. See also section Turn to move the cursor Required channel num Setup Back Main menu Configuration and operationStart-up View transmitter statusView fault status DCNSet monitoring options View version informationSet transmission mode Set network modeSet number of channels Set channel quality and assign inputs to channels Per Channel Settings Set channel names Disable or enable carriers View carrier assignmentsConfigure auxiliary inputs Per Input Sensitivity settings Enable / disable IR-monitoringEnable / disable headphone output Set sensitivity of the inputsReset all options to factory default values Choose transmitter nameDescription Medium and High Power RadiatorsIntegrus Radiators Attaching the suspension bracket Radiator status indicationMounting the radiators Mounting on a floor stand Wall mountingMounting on horizontal surfaces Connecting radiators to the transmitterCeiling mounting Low Power Wide Beam Radiator Using the output power selection switchMounting the Radiator LimitationsIntegrus Receivers Operation Reception test modeReceiver headphones Integrus Charging Units LBB 4560 Charging unitCharging procedure Wall mounting the charging cabinetTroubleshooting Integrus Installation and User Instructions Troubleshooting Technical Data System SpecificationMedium and High Power Radiators Radiators and AccessoriesTransmitter Upgrade Kit range Transmitters and ModulesNiMH Battery Pack Receivers, Battery Packs and Charging UnitsLow Power Wide Beam Radiator Wall Mounting BracketConnection details Guaranteed rectangular footprints Angle Product index

3122 475 22015en specifications

Bosch Appliances are synonymous with quality and innovation, and the model 3122 475 22015en showcases these attributes elegantly. This appliance combines advanced engineering with intuitive design, making it a valuable addition to any modern kitchen.

One of the standout features of the Bosch 3122 475 22015en is its efficiency. Designed to optimize performance while using minimal energy, this appliance is ideal for environmentally-conscious consumers. It complies with strict energy standards, ensuring that it not only delivers superior results but also helps in reducing household energy bills.

The appliance is equipped with cutting-edge technology that enhances its functionality. One significant innovation is the EcoSilence Drive, which ensures powerful performance with minimal noise. This makes the Bosch 3122 475 22015en an excellent choice for open-concept living spaces or homes where silence is valued.

Another noteworthy aspect is its PrecisionWash technology. This intelligent feature uses sensors to detect soil levels, adjusting the wash cycle for optimal cleaning power. This ensures that every dish, regardless of the load, comes out sparkling clean, thus providing peace of mind for users who value cleanliness.

The design of the Bosch 3122 475 22015en is sleek and modern, with a stainless-steel finish that complements contemporary kitchen aesthetics. Its ergonomic controls are intuitive and user-friendly, making operation straightforward even for those who are not technologically savvy.

In addition to its performance and aesthetics, safety is also a priority in the design of this appliance. It includes multiple safety features such as a Child Lock for added peace of mind, ensuring a safe environment for households with young children.

Furthermore, this model incorporates flexible loading options, including adjustable racks and foldable tines, allowing users to customize the interior space to accommodate various sizes and shapes of dishes. This adaptability maximizes utility and enhances user experience.

In conclusion, the Bosch Appliances 3122 475 22015en is a perfect blend of performance, efficiency, and innovative technology. With features like EcoSilence Drive and PrecisionWash, alongside a focus on safety and flexibility, it truly embodies Bosch's commitment to creating high-quality appliances that meet the needs of modern living. Whether you are an avid chef or simply enjoy hosting, this appliance is designed to make everyday tasks easier and more efficient.
Top Page Image Contents