Dell E5550 owner manual Installing the Palmrest, Removing the Power-Switch Board

5.Push the palmrest to release and remove the palmrest from the computer [2].

Installing the Palmrest

1.Place the palmrest on the computer.

2.Connect the following cables to their connectors on the system board:

a.power board

b.LED board

c.USH board

d.touchpad board

3.Tighten the screws at the front and back of the computer to secure the palmrest.

4.Install the:

a.keyboard

b.keyboard trim

c.battery

d.base cover

5.Follow the procedures in After Working Inside Your Computer

Removing the Power-Switch Board

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove the:

a.base cover

b.battery

c.keyboard trim

d.keyboard

e.palmrest

3.Perform the following steps to remove the power-switch board from the palmrest:

a.Remove the screws that secure the power-switch board to the palmrest [1].

b.Remove the power-switch board from the palmrest [2].

16