Table 3. Video
Option | Description |
|
|
LCD Brightness | Allows you to set the display brightness depending up on the power |
| source (On Battery and On AC). |
NOTE: The Video setting will only be visible when a video card is installed into the system.
Table 4. Security
Option | Description | |
|
| |
Admin Password | Allows you to set, change, or delete the administrator (admin) password. | |
|
| NOTE: You must set the admin password before you set the system |
|
| or hard drive password. Deleting the admin password automatically |
|
| deletes the system password and the hard drive password. |
|
| NOTE: Successful password changes take effect immediately. |
| Default Setting: Not set | |
System Password | Allows you to set, change or delete the system password. | |
|
| NOTE: Successful password changes take effect immediately. |
| Default Setting: Not set | |
Internal | Allows you to set, change or delete the password on the system's | |
| internal | |
|
| NOTE: Successful password changes take effect immediately. |
| Default Setting: Not set | |
Strong Password | Allows you to enforce the option to always set strong passwords. | |
| Default Setting: Enable Strong Password is not selected. | |
|
| NOTE: If Strong Password is enabled, Admin and System passwords |
|
| must contain at least one uppercase character, one lowercase |
|
| character and be at least 8 characters long. |
Password Configuration | Allows you to determine the minimum and maximum length of | |
| Administrator and System passwords. | |
Password Bypass | Allows you to enable or disable the permission to bypass the System and | |
| the Internal HDD password, when they are set. The options are: | |
| • | Disabled |
| • | Reboot bypass |
| Default Setting: Disabled | |
Password Change | Allows you to enable the disable permission to the System and Hard | |
| Drive passwords when the admin password is set. |
47