Crown 137769-3 operation manual CobraNet Input Window

Page 47

DBC Network Bridge

5 Advanced Operation

5.2.2 CobraNet: Input

To access the CobraNet Input window, click on the CobraNet tab, then click on the CobraNet Input tab. The CobraNet Input window will open (Figure 5.3).

The DBC Network Bridge can accept three Bundles from the CobraNet network and route the audio Slots of those Bundles into the process- ing and mixing of the unit. These three Bundles (RxB, RxC, and RxD), are assigned Bundle numbers by the Bundle window. If a transmitter is supplying audio on that Bundle, the Active lamp will light. The 'Seek' button allows scanning of the multicast Bundles (Bundles 1-

255)to see if any of the Bundles have audio data on them. If audio is detected on any of those Bundles, the Bundle number will stop at that point.

The individual audio Slots are assigned one of the eight CobraNet Inputs to the DBC Network Bridge. Once the eight CobraNet Inputs have been assigned Bundles and Slots, they can be used by the unit for routing and processing. The CobraNet Inputs each have a unique label for identification and can be routed into the processor in several ways. The Input Processing Sections can accept either the analog input or the CobraNet Input auxiliary analog input, or a digital AES/ EBU input. In addition, a CobraNet Input can be routed directly to a corresponding AUX Output. The monitor output has access to all eight CobraNet Inputs in its mix.

Links from any of the 8 bundle audio channels can be drawn by click- ing on the pink boxes and dragging the wire to the chosen input. The ‘Default Link’ button sets up the first bundle to link to the respective 8 CobraNet inputs, while the ‘Unlink’ button removes all links.

5.2.3 CobraNet: Output

See this information in the Operation Section 4.7.8.

Figure 5.3 CobraNet Input Window

Operation Manual

page 47

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Some models may be exported under the name Amcron DBC Network BridgeUse only with a cart, stand, tripod, bracket, or Important Safety InstructionsEMC Standards Safety StandardEuropean Representatives Name and Address Equipment Type Digital B-ChainAudio and Network Connections Please refer to Figures 1.1 Getting Started With the DBC Network BridgeDBC DB25F Digital AES/EBU Pinouts 3 TCP/IQ Addressing Rules IntroductionSelecting Settings Control Panel 4 TCP/IQ SetupInternal Properties Window 5 TCP/IQ Addressing Worksheet Example of AN IQ Addressing Worksheet2C. Close the software. Repeat as necessary 11 The Discovery Screen 14 The Unit Presets Window Table of Contents Welcome FeaturesHow to Use This Manual 3CREEN #HANNELS#ANDA3UBWOOFERS Connecting to AC Mains SetupUnpack and Install Your DBC Network Bridge Speech Mic, speech DBm/dBV WiringAnalog, Digital and Auxiliary Inputs Dynamic mic Condenser mic Hot condenser MentBalanced Monitor Output Wiring Balanced Input WiringUnbalanced Input Wiring Control Port Connections Unbalanced Monitor Output WiringCobraNet Connections Operation Monitor Out Connector Back Panel Controls and Connectors IEC AC Power InletPrimary Network Connector Secondary Network ConnectorLCD Control Screen shows SceneMenu Tree Operation ExamplesOperation Example System Overview Presets and ScenesIQwic Overview PC RequirementsInput Level Meters Preset InformationMetering Output Level MetersFront Panel Control Lock Out LED Display ModeGeneral Tab Real Time ClockBasic Processing Functions Signal Path Tab, Cinema Surround FormSurround Per-Channel Signal Processing Booth Monitor Source SelectThreshold Input CompressorOn/Off Compression RatioChannel Select Input DelaySignal Path window Delay SettingsFrequency Response Graph Frequency, Gain and Q SettingsEQ Filters Add ButtonCombined Responses Show Magnitude/PhaseFrequency Select Field Frequency SliderMaster fader works like this All Outputs Volume Controls13 Signal Generator Window Signal GeneratorCobraNet Explanation 14 CobraNet Output Window CobraNet OutputDBC Outputs Meters CobraNet Bundle/Channel Selector Input Selector Buttons Level SliderMute Button Polarity ButtonStandard Cinema Preset Button Preset PresetsPreset Segue Preset Options NoticePreset Select Buttons Preset EditorPreset Name Preset Control Window18 Scenes Window ScenesNamed Scene EditorScene Controls20 Events Scheduler Window Events SchedulerSchedule One Time EventsPeriodic Events Output Dynamic Cut/Boost Meters General Firmware Features Input Level MetersMemory Backup Input Dynamic Cut/Boost MetersAdvanced Operation Advanced Operation Table of ContentsSystem Contact System NameSystem Description System LocationConductor CobraNet SetupStatus indicators IP AddressCobraNet Input Window CobraNet InputControl Port Window Control PortPin Pin State IndicatorControl Port Window Digital Inputs Edit ButtonsSet Objects Recall PresetAdd / Remove Buttons Object ListInclude Control Port Condition Logic Setup WindowCondition NameManual Output State Pin State IndicatorReflect Preset Control Port Window Digital Outputs SectionControl Port Window Analog Outputs Section Control Port Window Analog Inputs Section AINInput Path Input Level/Polarity/Mute same as Advanced Form Firmware FeaturesInput Delay Input Gate Auto Level Settings Output Path Same as Output DelayInput Selector Input Select SwitchInput Signal Fader, Muter, and Inverter Input Path19 Input Delay Window Hardware DelaysHysteresis Signal DelayDepth Static ThresholdIdle Gain Auto-LevelerTarget Level Max GainPriority Ducking AutomixerDepth of Cut Ambience WeightingAutomix Controls Priority24 Automix Matrix Window Automix MatrixAutomixing Group Controls Priority Mix EnableHighest Open Mic Priority Indicator EnableAutomix Group Adaptive GatingAmbient Level Meter Group Gate Threshold Ambient Offset27 Solo/Mute Window Solo/MuteOutput EQ Filters Output PathOutput Processing Sections Expansion Ratio Program Level Dependent ModeSense Delay Ambient LevelerFour parameters control this feature 32 Outputs Window Outputs ButtonOutput Section Technical DescriptionAudio Input Section DSP Processing SectionAdditional Error Checking TroubleshootingCondition Both LEDs flashing Advanced Signal Path Window with Preset-32 Icons Enabled Specifications Required AC Mains AC Line Connector 15A IEC AC power inletGlossary Appendix a TCP-IQ Network BasicsTCP/IQ Network Basics Component firmware upgrades via the networkMultiple Network Communication Via an IP Router 1Fast Ethernet 100Base-T Closer Look at CobraNetRepeater Networks Switched NetworksAudio Specs Bundles and Audio ChannelsService United States & Canada WarrantyWorldwide Except USA & Canada Credit card information Crown Audio Factory Service InformationDBC Network Bridge

137769-3 specifications

Crown 137769-3 is a state-of-the-art electric forklift designed to meet the demands of modern material handling and warehouse operations. Known for its robust performance and advanced technology, this model is favored by businesses seeking efficiency and reliability.

One of the standout features of the Crown 137769-3 is its exceptional lifting capacity. With the ability to lift heavy loads with ease, it is perfect for high-capacity warehouses and industrial environments. The forklift also boasts an impressive lifting height, allowing for the stacking of goods in high racks, maximizing vertical space and optimizing storage solutions.

The ergonomics of the Crown 137769-3 are meticulously designed to enhance operator comfort and productivity. The spacious operator compartment offers ample legroom and an adjustable seat, reducing fatigue during long shifts. Additionally, the intuitive controls and clear visibility contribute to a safer and more efficient working environment, minimizing the risk of accidents.

Crown’s innovative technologies are at the forefront of the 137769-3's appeal. It features the Crown Engineered Reliability (Crown ER) system, which ensures that critical components are built to last, significantly reducing maintenance needs and downtime. The integrated monitoring system provides real-time data on performance, vehicle status, and battery life, enabling managers to optimize operations effectively.

Another key technology featured in this model is the smart traction control system, designed to provide enhanced stability and control, particularly in uneven terrains. This feature is essential for preventing tip-overs and ensuring the safety of both the operator and the loads being transported.

The Crown 137769-3 is powered by long-lasting batteries that offer impressive run times, allowing for extended usage without frequent recharging. This efficiency helps businesses maximize productivity while minimizing energy costs.

In summary, the Crown 137769-3 combines impressive lifting capabilities, advanced ergonomics, robust technology, and energy efficiency, making it an ideal choice for any warehouse operation. Its reliability, safety features, and user-friendly design contribute to a seamless operational experience, ensuring that businesses can keep pace with the demands of modern logistics and distribution. This model stands out as an excellent investment for companies striving for excellence in material handling.
Top Page Image Contents