Crown 137769-3 operation manual Control Port Window Analog Inputs Section AIN

Page 53

DBC Network Bridge

5 Advanced Operation

Control Port Window: Analog Inputs Section (AIN 1-8)

Find the Analog Inputs section (Figure 5.13) in the Control Port win- dow. It has a status indicator and level meter for each input channel.

The Control Port analog inputs allow a 0 to +10 VDC signal to be input to allow remote control of continuously variable objects such as faders or fil- ter frequencies. They can also be used to control switched objects (just like the Digital Inputs). When the Edit button associated with a particular input is pressed, the Control Port Assignment Dialog box appears and allows programming of the input just as was discussed for the Digital Inputs. These inputs can be used to sense the presence of an analog input signal level, such as ordinary 10 kilohm linear potentiometers for level control (Figure 5.14). Analog inputs can alternately be set to sense simple contact closure.

Control Port Window: Analog Outputs Section

Find the Analog Outputs section (Figure 5.15) in the Control Port window.

In addition to the eight Digital Outputs, there are eight Analog Outputs that can be used to provide an output voltage (0 to +10V DC for control). These outputs can reflect a particular analog object such as a fader, or a switched object and, can be used to provide drive for such things as lighting con- trols or for a standard digital type output.

The settings are remembered in a Preset, so they can be used to change the voltage of a particular output based upon Preset.

There are one indicator and six controls for each output.

1.Pin State Indicator: indicates the logical 'Pin-High' or 'Pin-Low' sta- tus of the actual hardware output.

2.Manual: directly controls the binary output state of the corresponding pin when in Manual mode.

3.Polarity: changes the polarity of the analog output regardless of the pin control mode.

4.Reflect Manual: causes the output to directly reflect the state of its Manual control.

5.Reflect Binary: causes the digital output to reflect the state of the selected binary object within the DBC Network Bridge. Only a single object may be specified.

6.Reflect Slider: causes the analog output to reflect the setting of the slider control associated with the output.

7.Reflect dB: causes the analog output to reflect the status of the selected dB object. Only a single dB object may be specified.

Figure 5.13 Analog Inputs Section

of the Control-Port Window

1

2

3

4

5

6

7

Figure 5.14 Sample Control-Port Analog Input Circuit

Ascrew-terminal board with barrier-block to DB37M connections makes it easy to interface external circuitry to the Control Port. Measurement Computing™ Corp. offers a suitable screw-terminal board (part number CIO-MINI37), along with an enclosure (part number ENCMINI37) for this use.

Contact Measurement Computing Corp. at www.measurementcomputing.com or (508) 946-5100.

Figure 5.15 Analog Outputs Section of the Control-Port Window

Operation Manual

page 53

Page 52 Page 54
Image 53
Page 52 Page 54
Contents Some models may be exported under the name Amcron DBC Network BridgeUse only with a cart, stand, tripod, bracket, or Important Safety InstructionsEuropean Representatives Name and Address Safety StandardEquipment Type Digital B-Chain EMC StandardsAudio and Network Connections Please refer to Figures 1.1 Getting Started With the DBC Network BridgeDBC DB25F Digital AES/EBU Pinouts 3 TCP/IQ Addressing Rules IntroductionSelecting Settings Control Panel 4 TCP/IQ SetupInternal Properties Window 5 TCP/IQ Addressing Worksheet Example of AN IQ Addressing Worksheet2C. Close the software. Repeat as necessary 11 The Discovery Screen 14 The Unit Presets Window Table of Contents Welcome FeaturesHow to Use This Manual 3CREEN #HANNELS#ANDA3UBWOOFERS Connecting to AC Mains SetupUnpack and Install Your DBC Network Bridge Analog, Digital and Auxiliary Inputs WiringDynamic mic Condenser mic Hot condenser Ment Speech Mic, speech DBm/dBVBalanced Monitor Output Wiring Balanced Input WiringUnbalanced Input Wiring Control Port Connections Unbalanced Monitor Output WiringCobraNet Connections Operation Primary Network Connector Back Panel Controls and Connectors IEC AC Power InletSecondary Network Connector Monitor Out ConnectorLCD Control Screen shows SceneMenu Tree Operation ExamplesOperation Example IQwic Overview Presets and ScenesPC Requirements System OverviewMetering Preset InformationOutput Level Meters Input Level MetersGeneral Tab LED Display ModeReal Time Clock Front Panel Control Lock OutSurround Per-Channel Signal Processing Signal Path Tab, Cinema Surround FormBooth Monitor Source Select Basic Processing FunctionsOn/Off Input CompressorCompression Ratio ThresholdSignal Path window Input DelayDelay Settings Channel SelectEQ Filters Frequency, Gain and Q SettingsAdd Button Frequency Response GraphFrequency Select Field Show Magnitude/PhaseFrequency Slider Combined ResponsesMaster fader works like this All Outputs Volume Controls13 Signal Generator Window Signal GeneratorCobraNet Explanation 14 CobraNet Output Window CobraNet OutputMute Button Input Selector Buttons Level SliderPolarity Button DBC Outputs Meters CobraNet Bundle/Channel SelectorPreset Segue PresetsPreset Options Notice Standard Cinema Preset Button PresetPreset Name Preset EditorPreset Control Window Preset Select Buttons18 Scenes Window ScenesScene Scene EditorControls Named20 Events Scheduler Window Events SchedulerSchedule One Time EventsPeriodic Events Memory Backup General Firmware Features Input Level MetersInput Dynamic Cut/Boost Meters Output Dynamic Cut/Boost MetersAdvanced Operation Advanced Operation Table of ContentsSystem Description System NameSystem Location System ContactStatus indicators CobraNet SetupIP Address ConductorCobraNet Input Window CobraNet InputControl Port Window Control PortControl Port Window Digital Inputs Pin State IndicatorEdit Buttons PinAdd / Remove Buttons Recall PresetObject List Set ObjectsCondition Control Port Condition Logic Setup WindowName IncludeReflect Preset Output State Pin State IndicatorControl Port Window Digital Outputs Section ManualControl Port Window Analog Outputs Section Control Port Window Analog Inputs Section AINInput Delay Input Gate Auto Level Settings Advanced Form Firmware FeaturesOutput Path Same as Output Delay Input Path Input Level/Polarity/Mute same asInput Signal Fader, Muter, and Inverter Input Select SwitchInput Path Input Selector19 Input Delay Window Hardware DelaysDepth Signal DelayStatic Threshold HysteresisTarget Level Auto-LevelerMax Gain Idle GainPriority Ducking AutomixerAutomix Controls Ambience WeightingPriority Depth of Cut24 Automix Matrix Window Automix MatrixHighest Open Mic Priority Indicator Priority Mix EnableEnable Automixing Group ControlsAmbient Level Meter Adaptive GatingGroup Gate Threshold Ambient Offset Automix Group27 Solo/Mute Window Solo/MuteOutput EQ Filters Output PathOutput Processing Sections Sense Delay Program Level Dependent ModeAmbient Leveler Expansion RatioFour parameters control this feature 32 Outputs Window Outputs ButtonAudio Input Section Technical DescriptionDSP Processing Section Output SectionAdditional Error Checking TroubleshootingCondition Both LEDs flashing Advanced Signal Path Window with Preset-32 Icons Enabled Specifications Required AC Mains AC Line Connector 15A IEC AC power inletGlossary Appendix a TCP-IQ Network BasicsTCP/IQ Network Basics Component firmware upgrades via the networkMultiple Network Communication Via an IP Router 1Fast Ethernet 100Base-T Closer Look at CobraNetAudio Specs Switched NetworksBundles and Audio Channels Repeater NetworksService United States & Canada WarrantyWorldwide Except USA & Canada Credit card information Crown Audio Factory Service InformationDBC Network Bridge

137769-3 specifications

Crown 137769-3 is a state-of-the-art electric forklift designed to meet the demands of modern material handling and warehouse operations. Known for its robust performance and advanced technology, this model is favored by businesses seeking efficiency and reliability.

One of the standout features of the Crown 137769-3 is its exceptional lifting capacity. With the ability to lift heavy loads with ease, it is perfect for high-capacity warehouses and industrial environments. The forklift also boasts an impressive lifting height, allowing for the stacking of goods in high racks, maximizing vertical space and optimizing storage solutions.

The ergonomics of the Crown 137769-3 are meticulously designed to enhance operator comfort and productivity. The spacious operator compartment offers ample legroom and an adjustable seat, reducing fatigue during long shifts. Additionally, the intuitive controls and clear visibility contribute to a safer and more efficient working environment, minimizing the risk of accidents.

Crown’s innovative technologies are at the forefront of the 137769-3's appeal. It features the Crown Engineered Reliability (Crown ER) system, which ensures that critical components are built to last, significantly reducing maintenance needs and downtime. The integrated monitoring system provides real-time data on performance, vehicle status, and battery life, enabling managers to optimize operations effectively.

Another key technology featured in this model is the smart traction control system, designed to provide enhanced stability and control, particularly in uneven terrains. This feature is essential for preventing tip-overs and ensuring the safety of both the operator and the loads being transported.

The Crown 137769-3 is powered by long-lasting batteries that offer impressive run times, allowing for extended usage without frequent recharging. This efficiency helps businesses maximize productivity while minimizing energy costs.

In summary, the Crown 137769-3 combines impressive lifting capabilities, advanced ergonomics, robust technology, and energy efficiency, making it an ideal choice for any warehouse operation. Its reliability, safety features, and user-friendly design contribute to a seamless operational experience, ensuring that businesses can keep pace with the demands of modern logistics and distribution. This model stands out as an excellent investment for companies striving for excellence in material handling.
Top Page Image Contents