Crown 137769-3 Presets, Label, Preset Segue, Verify Recall or Store, Preset Options Notice

Page 37

DBC Network Bridge

4 Operation

4.7.10 Presets

Click on the Unit Presets tab to open the Presets window (Figure 4.16).

The DBC Network Bridge has the ability to reconfigure itself with a single command. Thirty-two

1

 

'Presets' can be stored and recalled via a variety of means including the front panel, a Control Port

 

Input, or a scheduled 'Event'. Preset 32 is the standard cinema setup, which works in most

 

cases. Preset 32 is explained under number 6 below.

 

1. Store

 

3

2

For a Preset to be stored, all of the individual controls needs to be set up using IQwic while on- line to the DBC Network Bridge, then press the 'Store' button and a select a Preset.

To ensure that settings are not inadvertently lost due to selecting a Preset instead of storing a Pre- set, the “Prompt to recall or store” checkbox allows a query window to display whenever a Preset button is pressed in order to ensure the intent of the user.

2. Label

4

Each Preset has a 32 character user-definable label.

3. Preset Segue

This enables smooth level transitions between Presets. When a Preset is selected, all of the fader settings are changed at a rate that is determined by the ‘Preset Segue Settings’ box. The rate of change can be either a 'Fixed Time' that is selectable from 0 second to 255 seconds or a 'Fixed Rate' that goes from 0.5 dB/sec to 40 dB/sec.

4. Verify Recall or Store

When you click on a Preset number, this window appears so that you can recall the selected Pre- set, store it, or cancel.

5. Preset Options Notice

Right-click on preset numbers to open more options: Load or save Presets to file, cut or copy Pre-

sets to clip area, and Edit Presets. Selecting Edit Presets opens the Preset Editor window6 described on page 38.

6. Standard Cinema Preset Button (Preset 32)

5

Pressing this button recalls the preset for a standard cinema setup: a read-only preset that cannot be edited by the user. If you want to create a preset based on Preset 32 but with changes, save it to another Preset. The Standard Cinema preset contains the following settings in the DBC Network Bridge:

Figure 4.16 Presets Window

•The input is set to analog; the outputs are set to –20 dB.

•The Monitor is set to Ch1 at 0 dB.

•The CobraNet output for L, R, C, SW is set to TxA on Bundle 100 at 24 -bit.

•The CobraNet output for SL, SR, BSL, BSR is set to TxB on Bundle 200 at 24-bit.

•The CobraNet input for all eight input channels set to TxA on Bundle 300.

Operation Manual

page 37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Some models may be exported under the name Amcron DBC Network BridgeUse only with a cart, stand, tripod, bracket, or Important Safety InstructionsEuropean Representatives Name and Address Safety StandardEquipment Type Digital B-Chain EMC StandardsAudio and Network Connections Please refer to Figures 1.1 Getting Started With the DBC Network BridgeDBC DB25F Digital AES/EBU Pinouts 3 TCP/IQ Addressing Rules IntroductionSelecting Settings Control Panel 4 TCP/IQ SetupInternal Properties Window 5 TCP/IQ Addressing Worksheet Example of AN IQ Addressing Worksheet2C. Close the software. Repeat as necessary 11 The Discovery Screen 14 The Unit Presets Window Table of Contents How to Use This Manual FeaturesWelcome 3CREEN #HANNELS#ANDA3UBWOOFERS Unpack and Install Your DBC Network Bridge SetupConnecting to AC Mains Analog, Digital and Auxiliary Inputs WiringDynamic mic Condenser mic Hot condenser Ment Speech Mic, speech DBm/dBVUnbalanced Input Wiring Balanced Input WiringBalanced Monitor Output Wiring CobraNet Connections Unbalanced Monitor Output WiringControl Port Connections Operation Primary Network Connector Back Panel Controls and Connectors IEC AC Power InletSecondary Network Connector Monitor Out ConnectorLCD Control Screen shows SceneOperation Example Operation ExamplesMenu Tree IQwic Overview Presets and ScenesPC Requirements System OverviewMetering Preset InformationOutput Level Meters Input Level MetersGeneral Tab LED Display ModeReal Time Clock Front Panel Control Lock OutSurround Per-Channel Signal Processing Signal Path Tab, Cinema Surround FormBooth Monitor Source Select Basic Processing FunctionsOn/Off Input CompressorCompression Ratio ThresholdSignal Path window Input DelayDelay Settings Channel SelectEQ Filters Frequency, Gain and Q SettingsAdd Button Frequency Response GraphFrequency Select Field Show Magnitude/PhaseFrequency Slider Combined ResponsesMaster fader works like this All Outputs Volume Controls13 Signal Generator Window Signal GeneratorCobraNet Explanation 14 CobraNet Output Window CobraNet OutputMute Button Input Selector Buttons Level SliderPolarity Button DBC Outputs Meters CobraNet Bundle/Channel SelectorPreset Segue PresetsPreset Options Notice Standard Cinema Preset Button PresetPreset Name Preset EditorPreset Control Window Preset Select Buttons18 Scenes Window ScenesScene Scene EditorControls Named20 Events Scheduler Window Events SchedulerPeriodic Events One Time EventsSchedule Memory Backup General Firmware Features Input Level MetersInput Dynamic Cut/Boost Meters Output Dynamic Cut/Boost MetersAdvanced Operation Advanced Operation Table of ContentsSystem Description System NameSystem Location System ContactStatus indicators CobraNet SetupIP Address ConductorCobraNet Input Window CobraNet InputControl Port Window Control PortControl Port Window Digital Inputs Pin State IndicatorEdit Buttons PinAdd / Remove Buttons Recall PresetObject List Set ObjectsCondition Control Port Condition Logic Setup WindowName IncludeReflect Preset Output State Pin State IndicatorControl Port Window Digital Outputs Section ManualControl Port Window Analog Outputs Section Control Port Window Analog Inputs Section AINInput Delay Input Gate Auto Level Settings Advanced Form Firmware FeaturesOutput Path Same as Output Delay Input Path Input Level/Polarity/Mute same asInput Signal Fader, Muter, and Inverter Input Select SwitchInput Path Input Selector19 Input Delay Window Hardware DelaysDepth Signal DelayStatic Threshold HysteresisTarget Level Auto-LevelerMax Gain Idle GainPriority Ducking AutomixerAutomix Controls Ambience WeightingPriority Depth of Cut24 Automix Matrix Window Automix MatrixHighest Open Mic Priority Indicator Priority Mix EnableEnable Automixing Group ControlsAmbient Level Meter Adaptive GatingGroup Gate Threshold Ambient Offset Automix Group27 Solo/Mute Window Solo/MuteOutput Processing Sections Output PathOutput EQ Filters Sense Delay Program Level Dependent ModeAmbient Leveler Expansion RatioFour parameters control this feature 32 Outputs Window Outputs ButtonAudio Input Section Technical DescriptionDSP Processing Section Output SectionAdditional Error Checking TroubleshootingCondition Both LEDs flashing Advanced Signal Path Window with Preset-32 Icons Enabled Specifications Required AC Mains AC Line Connector 15A IEC AC power inletGlossary Appendix a TCP-IQ Network BasicsTCP/IQ Network Basics Component firmware upgrades via the networkMultiple Network Communication Via an IP Router 1Fast Ethernet 100Base-T Closer Look at CobraNetAudio Specs Switched NetworksBundles and Audio Channels Repeater NetworksService United States & Canada WarrantyWorldwide Except USA & Canada Credit card information Crown Audio Factory Service InformationDBC Network Bridge

137769-3 specifications

Crown 137769-3 is a state-of-the-art electric forklift designed to meet the demands of modern material handling and warehouse operations. Known for its robust performance and advanced technology, this model is favored by businesses seeking efficiency and reliability.

One of the standout features of the Crown 137769-3 is its exceptional lifting capacity. With the ability to lift heavy loads with ease, it is perfect for high-capacity warehouses and industrial environments. The forklift also boasts an impressive lifting height, allowing for the stacking of goods in high racks, maximizing vertical space and optimizing storage solutions.

The ergonomics of the Crown 137769-3 are meticulously designed to enhance operator comfort and productivity. The spacious operator compartment offers ample legroom and an adjustable seat, reducing fatigue during long shifts. Additionally, the intuitive controls and clear visibility contribute to a safer and more efficient working environment, minimizing the risk of accidents.

Crown’s innovative technologies are at the forefront of the 137769-3's appeal. It features the Crown Engineered Reliability (Crown ER) system, which ensures that critical components are built to last, significantly reducing maintenance needs and downtime. The integrated monitoring system provides real-time data on performance, vehicle status, and battery life, enabling managers to optimize operations effectively.

Another key technology featured in this model is the smart traction control system, designed to provide enhanced stability and control, particularly in uneven terrains. This feature is essential for preventing tip-overs and ensuring the safety of both the operator and the loads being transported.

The Crown 137769-3 is powered by long-lasting batteries that offer impressive run times, allowing for extended usage without frequent recharging. This efficiency helps businesses maximize productivity while minimizing energy costs.

In summary, the Crown 137769-3 combines impressive lifting capabilities, advanced ergonomics, robust technology, and energy efficiency, making it an ideal choice for any warehouse operation. Its reliability, safety features, and user-friendly design contribute to a seamless operational experience, ensuring that businesses can keep pace with the demands of modern logistics and distribution. This model stands out as an excellent investment for companies striving for excellence in material handling.
Top Page Image Contents