Crown 137769-3 Control Port Window Digital Inputs, Pin State Indicator, Edit Buttons

Page 49

DBC Network Bridge

5 Advanced Operation

Control Port Window: Digital Inputs

The Digital Inputs are high or low only. They are current driven and will accept +5V or +10V inputs (+25VDC max), and are well suited for sensing contact closure (Figure 5.6). They switch at approximately +1 VDC. They can be used to control one or more objects with the DBC Network Bridge. The Control Port digital inputs can be used to sense logic 'high' or 'low' signals to control many of the features of the DBC Network Bridge.

Find the Digital Inputs section (Figure 5.5) in the Control Port window. Its features are described below.

1. Pin State Indicator

This shows the actual status of the hardware input as it comes into the rear panel connector.

2. Edit Buttons

Pressing one of these buttons opens the Control Port Assignment Dialog box, explained later.

3. Pin

This number reflects the physical pin number of the DB37 connector on the rear of the unit.

4. Edit Mapped Conditions

Pressing this button opens the Condition Logic Setup window, described later.

Control Port Assignment Dialog

In the Control Port window, find the Digital Inputs section (Figure 5.7). When the Edit Button is pressed on a Digital Input, the Control Port Assignment Dialog box (Figure 5.8) opens to assist in setup of the input. It is described below and on the next page.

1. Control Port Object

This field displays the currently selected object or device, such as Digital Input 1 - Pin12.

2. Controls

The control buttons let you select which type of controls you want to display: Any, dB, or log- ical.

3. Named

You can enter text here to narrow the search for controls.

4. Controls List

This field displays a list of processes that can be applied to the object. Once the desired con- trol has been found in the Controls List, highlight it and press the Add button (5).

Figure 5.6 Sample

Control-Port Digital

Input Circuit

Figure 5.5 Digital Input Section in the Control Port Window

1

 

 

2

7

10

3

8

9

11

12

4

5

6

Figure 5.7 Control Port Assignment Dialog Window

Operation Manual

page 49

Page 48 Page 50
Image 49
Page 48 Page 50
Contents Some models may be exported under the name Amcron DBC Network BridgeUse only with a cart, stand, tripod, bracket, or Important Safety InstructionsEuropean Representatives Name and Address Safety StandardEquipment Type Digital B-Chain EMC StandardsAudio and Network Connections Please refer to Figures 1.1 Getting Started With the DBC Network BridgeDBC DB25F Digital AES/EBU Pinouts 3 TCP/IQ Addressing Rules IntroductionSelecting Settings Control Panel 4 TCP/IQ SetupInternal Properties Window 5 TCP/IQ Addressing Worksheet Example of AN IQ Addressing Worksheet2C. Close the software. Repeat as necessary 11 The Discovery Screen 14 The Unit Presets Window Table of Contents How to Use This Manual FeaturesWelcome 3CREEN #HANNELS#ANDA3UBWOOFERS Unpack and Install Your DBC Network Bridge SetupConnecting to AC Mains Analog, Digital and Auxiliary Inputs WiringDynamic mic Condenser mic Hot condenser Ment Speech Mic, speech DBm/dBVUnbalanced Input Wiring Balanced Input WiringBalanced Monitor Output Wiring CobraNet Connections Unbalanced Monitor Output WiringControl Port Connections Operation Primary Network Connector Back Panel Controls and Connectors IEC AC Power InletSecondary Network Connector Monitor Out ConnectorLCD Control Screen shows SceneOperation Example Operation ExamplesMenu Tree IQwic Overview Presets and ScenesPC Requirements System OverviewMetering Preset InformationOutput Level Meters Input Level MetersGeneral Tab LED Display ModeReal Time Clock Front Panel Control Lock OutSurround Per-Channel Signal Processing Signal Path Tab, Cinema Surround FormBooth Monitor Source Select Basic Processing FunctionsOn/Off Input CompressorCompression Ratio ThresholdSignal Path window Input DelayDelay Settings Channel SelectEQ Filters Frequency, Gain and Q SettingsAdd Button Frequency Response GraphFrequency Select Field Show Magnitude/PhaseFrequency Slider Combined ResponsesMaster fader works like this All Outputs Volume Controls13 Signal Generator Window Signal GeneratorCobraNet Explanation 14 CobraNet Output Window CobraNet OutputMute Button Input Selector Buttons Level SliderPolarity Button DBC Outputs Meters CobraNet Bundle/Channel SelectorPreset Segue PresetsPreset Options Notice Standard Cinema Preset Button PresetPreset Name Preset EditorPreset Control Window Preset Select Buttons18 Scenes Window ScenesScene Scene EditorControls Named20 Events Scheduler Window Events SchedulerPeriodic Events One Time EventsSchedule Memory Backup General Firmware Features Input Level MetersInput Dynamic Cut/Boost Meters Output Dynamic Cut/Boost MetersAdvanced Operation Advanced Operation Table of ContentsSystem Description System NameSystem Location System ContactStatus indicators CobraNet SetupIP Address ConductorCobraNet Input Window CobraNet InputControl Port Window Control PortControl Port Window Digital Inputs Pin State IndicatorEdit Buttons PinAdd / Remove Buttons Recall PresetObject List Set ObjectsCondition Control Port Condition Logic Setup WindowName IncludeReflect Preset Output State Pin State IndicatorControl Port Window Digital Outputs Section ManualControl Port Window Analog Outputs Section Control Port Window Analog Inputs Section AINInput Delay Input Gate Auto Level Settings Advanced Form Firmware FeaturesOutput Path Same as Output Delay Input Path Input Level/Polarity/Mute same asInput Signal Fader, Muter, and Inverter Input Select SwitchInput Path Input Selector19 Input Delay Window Hardware DelaysDepth Signal DelayStatic Threshold HysteresisTarget Level Auto-LevelerMax Gain Idle GainPriority Ducking AutomixerAutomix Controls Ambience WeightingPriority Depth of Cut24 Automix Matrix Window Automix MatrixHighest Open Mic Priority Indicator Priority Mix EnableEnable Automixing Group ControlsAmbient Level Meter Adaptive GatingGroup Gate Threshold Ambient Offset Automix Group27 Solo/Mute Window Solo/MuteOutput Processing Sections Output PathOutput EQ Filters Sense Delay Program Level Dependent ModeAmbient Leveler Expansion RatioFour parameters control this feature 32 Outputs Window Outputs ButtonAudio Input Section Technical DescriptionDSP Processing Section Output SectionAdditional Error Checking TroubleshootingCondition Both LEDs flashing Advanced Signal Path Window with Preset-32 Icons Enabled Specifications Required AC Mains AC Line Connector 15A IEC AC power inletGlossary Appendix a TCP-IQ Network BasicsTCP/IQ Network Basics Component firmware upgrades via the networkMultiple Network Communication Via an IP Router 1Fast Ethernet 100Base-T Closer Look at CobraNetAudio Specs Switched NetworksBundles and Audio Channels Repeater NetworksService United States & Canada WarrantyWorldwide Except USA & Canada Credit card information Crown Audio Factory Service InformationDBC Network Bridge

137769-3 specifications

Crown 137769-3 is a state-of-the-art electric forklift designed to meet the demands of modern material handling and warehouse operations. Known for its robust performance and advanced technology, this model is favored by businesses seeking efficiency and reliability.

One of the standout features of the Crown 137769-3 is its exceptional lifting capacity. With the ability to lift heavy loads with ease, it is perfect for high-capacity warehouses and industrial environments. The forklift also boasts an impressive lifting height, allowing for the stacking of goods in high racks, maximizing vertical space and optimizing storage solutions.

The ergonomics of the Crown 137769-3 are meticulously designed to enhance operator comfort and productivity. The spacious operator compartment offers ample legroom and an adjustable seat, reducing fatigue during long shifts. Additionally, the intuitive controls and clear visibility contribute to a safer and more efficient working environment, minimizing the risk of accidents.

Crown’s innovative technologies are at the forefront of the 137769-3's appeal. It features the Crown Engineered Reliability (Crown ER) system, which ensures that critical components are built to last, significantly reducing maintenance needs and downtime. The integrated monitoring system provides real-time data on performance, vehicle status, and battery life, enabling managers to optimize operations effectively.

Another key technology featured in this model is the smart traction control system, designed to provide enhanced stability and control, particularly in uneven terrains. This feature is essential for preventing tip-overs and ensuring the safety of both the operator and the loads being transported.

The Crown 137769-3 is powered by long-lasting batteries that offer impressive run times, allowing for extended usage without frequent recharging. This efficiency helps businesses maximize productivity while minimizing energy costs.

In summary, the Crown 137769-3 combines impressive lifting capabilities, advanced ergonomics, robust technology, and energy efficiency, making it an ideal choice for any warehouse operation. Its reliability, safety features, and user-friendly design contribute to a seamless operational experience, ensuring that businesses can keep pace with the demands of modern logistics and distribution. This model stands out as an excellent investment for companies striving for excellence in material handling.
Top Page Image Contents