EnGenius Technologies EAP350 manual

Page 12

11

•Highlight Internet Protocol Version 4 (TCP/IPv4) and select

Properties

•Select Use the following IP address and enter IP address and subnet mask then press OK.

Note: Ensure that the IP address and subnet mask are on the same subnet as the device.

For example: Device IP address: 192.168.1.1

PC IP address: 192.168.1.2 - 192.168.1.999

PC subnet mask: 255.255.255.0

Image 12

Contents EAP350 Table of Contents Error! Bookmark not definedBuilding a Wireless Network ManagementAppendix a FCC Interference Statement Revision History VersionDate Features and Benefits IntroductionPackage Contents System Requirements ApplicationsWireless Extensions to Ethernet networks Wired LAN backupSmall Office and Home Office Soho Networks Training/Educational facilities Considerations for Wireless Installation Before you BeginComputer Settings Windows XP/Windows Page Page Configure IPv4, select Manually Apple Mac X OSSelect Network in the Internet & Network section Hardware Installation Front Panel Rear Panel Configuring Your Access Point Default SettingsDefault Settings Web Configuration If successful, you will see the EAP350 User Menu Status Save/ReloadMain Page Wireless Client List System Log Refresh Update the log Clear Clear the log System LogOperation Mode SystemOperation Mode Accept / CancelSystem Properties Device Name Country/RegionIP Settings This page allows you to modify the devices IP settingsSpanning Tree Setting Bridge Forward DelaySpanning Tree Spanning Tree Status Bridge Hello TimePage Wireless Wireless NetworkWireless Network Wireless Mode Channel HT ModeExtension Channel Channel / FrequencySsid Profile Ssid ProfileSpecify the Ssid for current profile Specify the Vlan tag for the current profileWireless Security WEP EncryptionDefault Key Encryption Key #WPA-PSK WPA Pre-Shared Key Encryption WPA Pre-Shared Key EncryptionWPA Encryption Wireless MAC Filter Wireless Filter Access Point / WDS AP modeWireless Advanced Wireless Advanced Data Rate Transmit PowerWireless Traffic RTS/CTS ThresholdWPS Wi-Fi Protected Setup Wi-Fi Protected Setup WPS Authentication ModeWPS Current Status Self Pin CodeWDS Link Settings WDS Link Settings MAC Address Administration ManagementManagement Vlan Management VlanSnmp SnmpPage Backup/Restore Firmware Upgrade To perform the Firmware UpgradeTime Setting Time Manually Set Date and TimeAutomatically Get Date TimeLog Diagnosis LED Control Logout Reset Building a Wireless Network Access Point ModeAccess Point Mode with WDS Function WDS AP mode WDS Bridge Mode Federal Communication Commission Interference Statement FCC Radiation Exposure Statement