Black Box VX-HDMI-TP-3D40M, 3D HDMI Extender manual Hardware Installation

Page 16

Chapter 3: Hardware Installation

3. Hardware Installation

1.Connect an HDMI or DVI source (such as a Blu-ray disc player) to the transmitter.

2.Connect an HDMI or DVI display (such as an LCD TV) to the receiver.

3.Connect a CAT5/5e/6 cable between the transmitter and the receiver.

4.Make sure the CAT5/5e/6 cable is tightly connected (not loose).

5.Plug in the 5-VDC power supply to the receiver’s power jack.

6.Plug in the 5-VDC power supply to the transmitter’s power jack.

7.If you see a flickering or blinking image on the display, adjust the rotary control switch to improve the cable skew. 0 stands for the strongest HDMI signal level for the longest possible transmission distance. 7 stands for the weakest HDMI signal for short transmission distance. Adjust the signal level from 7 to 0 and stop turning the rotary switch when the audio/video is playing normally. Inappropriately setting the signal level might damage the extender.

Page 16

724-746-5500 blackbox.com

Page 15 Page 17
Image 16
Page 15 Page 17
Contents 3D Hdmi Extender Trademarks Used in this Manual Trademarks Used in this ManualNormas Oficiales Mexicanas NOM Electrical Safety Statement FCC and IC RFI Statements/NOM StatementNOM Statement NOM Statement Safety Instructions Safety InstructionsTable of Contents Specifications SpecificationsOverview FeaturesOverview Introduction What’s Included Hardware Description 2.4.1 TransmitterTransmitter back panel That will link to the receiver Receiver Receiver front panelHdmi signal level varies from Typical Configuration Connection diagramHardware Installation Hardware InstallationEdid Learning Edid LearningPerformance Notes Performance NotesCAT5 Appendix a Pin Definitions Appendix. Pin DefinitionsCAT5 RJ-45 Blackbox.com Blackbox.com Chapter Black Box Tech Support FREE! Live /7
Top Page Image Contents