SmartPath Enterprise Wireless Access Point, Outdoor Installation Guide
Figure 11. Attach external antennas.
6. Attaching the Ethernet Cable Waterproof Housing
The following steps explain how to ensure a weatherproof seal for the Ethernet cable using the waterproof housing assembly shown in Figure 12.
1.Disassemble the waterproof housing. There are three pieces: a threaded nut, a slotted cable grip, and a threaded housing.
2.Slide the threaded nut over the Ethernet cable.
3.Slip the slotted cable grip onto the Ethernet cable in front of the threaded nut.
4.Slide the threaded housing onto the cable and over the cable grip (the grip fits inside the housing).
5.Screw the threaded nut onto the threaded housing.
6.Plug the Ethernet cable into the connector. Screw the assembled housing onto the threaded connector cover.
7.Connect the other end of the Ethernet cable to a
Figure 12. Ethernet housing assembly.
Page 10 |
|