SmartPath Enterprise Wireless Access Point, Outdoor Installation Guide
press the Reset button on the chassis and hold it down for at least 10 seconds.
9. Ethernet Protector
In most cases, you can connect an Ethernet cable directly from the LWN602WA to a
The LWN602WA and outdoor PoE injectors have
Figure 16. Adding lightning arrestors.
1.Attach the Ethernet protection device to the building at the entry point of the shielded Ethernet cable from the LWN602WA.
2.Make the following connections:
•Ground the device by running a wire from the grounding stud to a grounded object, such as a water pipe, gas pipe, or grounding rod.
•Connect the shielded Ethernet cable from the LWN602WA to the port labeled "Line Side," and connect another Ethernet cable from the port labeled "Equipment Side" to the network.
Figure 17. Connecting the PoE injector inline.
Page 16 |
|