Roland RD-300SX Changing the Tone for a Zone, Performing with the Keyboard, with INC or DEC

Performing with the Keyboard

Changing the Tone for a Zone

When changing the tone assigned to a zone in Dual or Split mode, use [LOWER

SELECT] to specify the zone with the tone you want to change.

fig.01-14

1

2 2

1

If you want to select UPPER, press [LOWER SELECT] until the indicator is off.

When you want to select LOWER, press [LOWER SELECT] until the indicator is green.

fig.01-15
When selecting the UPPER zone	When selecting the LOWER zone

The TONE SELECT button indicators are red when the UPPER zone is selected and green when the LOWER zone is selected. In either zone, if tones from the same category are selected, the button's indicator lights in orange.

2

Select the tone category with a TONE SELECT button, then select the tone

with [INC] or [DEC].

[LOWER SELECT] is disabled

when [DUAL] or [SPLIT] is

switched off.

Adjust the Volume Level for Individual Zones (ZONE LEVEL sliders)

fig.01-16

The RD-300SX features two parts you can freely control using the instrument’s buttons and keys; these two parts are called the UPPER zone and LOWER zone.

You can adjust the volume for each zone using the ZONE LEVEL sliders.

24