Roland RD-300SX Turning the Power On and Off, Turning On the Power, Getting Ready, VOLUME slider

Getting Ready

Turning the Power On and Off

941

Once the connections have been completed, turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.

Turning On the Power

1

Before you switch on the power, turn the volume down all the way using the

VOLUME slider.

Also completely turn down the volume of any connected audio device and other equipment.

fig.00c-05

2

Press the [POWER] switch on the back of the unit.

The power will turn on, and “Pno” appears in the display.

fig.00c-06

Rear Panel

Lower Position

ON

3

Turn on the power to connected external devices.

4

Adjust the volume of the connected external device.

5

Adjust the RD-300SX’s volume to obtain the proper volume level.

To prevent incorrect functioning of the Pitch Bend Lever (p. 30), refrain from touching the lever when you turn on the power.

This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally.

942

13