Roland RD-300SX Changing the Keyboard’s Split Point, Hold down Split for several seconds

Performing with the Keyboard

Changing the Keyboard’s Split Point

You can change the point at which the keyboard is divided (the Split Point) in Split mode.

1

Hold down [SPLIT] for several seconds.

A screen such as the following appears, and the current value of the setting is displayed.

fig.disp.b3

2

While holding down [SPLIT], press the key that you want to use as the split

point.

You can adjust the split point in semitone increments.

When you release [SPLIT], the previous display will reappear. * The split-point key is included in the LOWER section.

fig.01-13

B3 (when the power is turned on)

A0 B7

Range in which the split point can be set

You can also change the split point by holding down [SPLIT] and pressing [INC] or [DEC].

The key for the split point appears in the display as shown below.

fig.01-11

Display
Letter	C	C	D	E
name
Display
Letter	E	F	F	G
name
Display
Letter	A	A	B	B
name

23