Roland RD-300SX Setup-Related Settings Common, Changing the Pedal Function Control Pedal Function

Settings for Each Function ([EDIT])

Setup-Related Settings (Common)

How to Make Settings

1.Press [EDIT].

The indicator lights, and the RD-300SX switches to Edit mode.

2.Press [INC] or [DEC] to select “Common,” then press

[ENTER].

fig.disp.Con

3.Referring to the following, press the TONE SELECT button to which the parameter you want to change is assigned.

The parameter name appears in the display while the button is held down. When the button is released, the value for the parameter is shown in the display.

TONE	Indication	Parameter
SELECT
button
PIANO		MFX Zone (p. 40)
E.PIANO		Control Pedal Function (p. 40)
ORGAN	—	—
STRINGS/	—	—
PAD
GUITAR/	—	—
BASS
BRASS/	—	—
WINDS
VOICE/	—	—
SYNTH
RHY/GM2	—	—

Only the indicators of buttons to which a parameter is assigned blink.

4.Press [INC] or [DEC] to set the value.

5.Press [EDIT] to turn off the indicator and quit editing.

You can return to Step 2 by pressing [EXIT].

Setting the Zone to which Multi Effects are Added (MFX Zone)

This specifies which zone is to have priority when the effects assigned to the Upper Tone and Lower Tone differ in Split mode or Dual mode (p. 20).

Indication	Description
	UPPER
	LOWER

*If same effects are assigned to the Upper Tone and Lower Tone, the same effects are added to both of Tones.

Changing the Pedal Function (Control Pedal Function)

This sets the function of the pedal switch or expression pedal (such as the optional EV-5) connected to the CONTROL jack on the rear panel.

This function cannot be used when Setup Pedal Shift is switched to ON (p. 39) .

Indication	Description
	Soft (Default)
	Sostenuto
	Expression
	Rhythm Start/Stop
	Multi-effects ON/OFF
	Modulation

40