Roland RD-300SX Adding a Variety Effects to the Sound Multi Effects, Changing the Depth of Effect

Performing with the Keyboard

Adding a Variety Effects to the Sound ([MULTI EFFECTS])

In addition to reverb (p. 27), you can apply a variety of changes to the RD-300SX’s sounds. These are referred to as “multi effects.” With the RD-300SX, you can select from 78 different effect types.

With the factory default settings, effects have been preselected for each tone.

Effects may not be applied with some of sounds.

fig.01-23

1, 2

1

Press [MULTI EFFECTS], getting its indicator to light.

Try fingering the keyboard.

The effect is applied to the currently selected tone.

2

To remove the effect, press [MULTI EFFECTS] once more, extinguishing the

indicator.

You can specify which zone is to have priority when the effects assigned to the Upper zone and the Lower zone differ. Refer to “Setting the Zone to

which Multi Effects are

Added (MFX Zone)” (p. 40).

Changing the Depth of Effect

You can change the levels of depth for the effect.

The content and range vary according to the MFX type. For more detailed information, refer to “Effects List” (p. 55).

1

Hold down [MULTI EFFECTS] and press [INC] or [DEC].

The depth for the effect being applied to the currently selected tone appears in the display.

The next time you choose the same tone, the effect with the depth you’ve selected here is applied.

You can change the effect type. Refer to “Changing the Multi-

effects Type” (p. 29).

28