Roland RD-300SX owner manual Changing the Pitch Fine Tune, Changing the Bend Range Bend Range

Settings for Each Function ([EDIT])

Changing the Pitch (Fine Tune)

Adjusts the pitch of the tone’s sound up or down in 1-cent steps (+/-50 cents).

Value

-50 – 50 (cent)

One cent is 1/100th of a semitone.

Changing the Bend Range (Bend Range)

This sets the amount of pitch change that will occur when you move the Pitch Bend lever in semitone increments (+/-2 octaves).

Value

0–24

Making the Settings for Each Zone Individually (Zone Parameter)

How to Make Settings

1.Press [EDIT].

The indicator lights, and the RD-300SX switches to Edit mode.

2.Press [INC] or [DEC] to select “U-L,” then press [ENTER].

fig.disp.U-L

3.Referring to the following, press the TONE SELECT button to which the parameter you want to change is assigned.

The parameter name appears in the display while the button is held down. When the button is released, the value for the parameter is shown in the display.

When setting the LOWER zone, set [LOWER SELECT] to ON.

TONE	Indication	Parameter
SELECT
button
PIANO		Key Transpose
E.PIANO		Pan
ORGAN		Damper Pedal Switch
STRINGS/		Control Pedal Switch
PAD
GUITAR/		Bender Switch
BASS
BRASS/		Modulation Switch
WINDS
VOICE/	—	—
SYNTH
RHY/GM2	—	—

Only the indicators of buttons to which a parameter is assigned blink.

4.Press [INC] or [DEC] to set the value.

5.Press [EDIT] to turn off the indicator and quit editing.

You can return to Step 2 by pressing [EXIT].

42