Roland RD-300SX Storing Settings to Setups WRITE, Settings Not Saved in a Setup, SELECT buttons

Using the Convenient Functions in Performances

Storing Settings to Setups ([WRITE])

If you want to use the changed content as a new Setup, use the following procedure to save the settings to a Setup.

You can store 32 Setups on the RD-300SX.

fig.02-05

1

3, 4 2 2

1

Press [WRITE], getting the indicator to light.

The Setup screen appears.

fig.disp.S11

2

Select the save-destination Setup, either by pressing [INC] or [DEC], or TONE

SELECT buttons.

3

Press [ENTER].

fig.disp.Sur

A confirmation screen (Sure?) appears.

If you do not want to save the Setup, press [EXIT] or [WRITE].

The operation is cancelled, and you are returned to the Tone screen.

4

When [ENTER] is pressed, saving of the Setup begins.

When you have finished saving the Setup, the [WRITE] indicator goes out.

You are returned to the Tone screen.

Settings Not Saved in a Setup

The following settings cannot be saved to a Setup.

•System settings (p. 37)

•SOUND CONTROL settings (p. 30)

•EQUALIZER Knob Position (p. 31)

•V-LINK settings (p. 51)

•Transpose (p. 25)

35