Roland RD-300SX owner manual Part On/Off Part, Setting the Pan, Turning Each Controller On and Off

Changing the pitch of the tone in semitone steps (Key Transpose)

Value

-48—0— 48

Setting the Pan

The Pan setting localizes the sound image of each part when the output is in stereo. With an increase in the value for L, more of the sound will be heard as coming from the left side. Similarly, more of the sound will originate at the right if the value of R is increased. When set to 0, the sound is heard as coming from the center.

Value

L64–0–R63

Turning Each Controller On and Off

These settings determine whether each individual part is controlled (ON), or not (OFF) by the pedals connected to each PEDAL jack (DAMPER, CONTROL), the Modulation lever, and the Bender.

Parameter	Value
Damper Pedal Switch	OFF, ON
Control Pedal Switch
Pitch Bender Switch
Modulation Switch

Settings for Each Function ([EDIT])

Part On/Off (Part)

You can choose whether or not to have messages from external MIDI devices be received by each individual part.

1.Press [EDIT].

The indicator lights, and the RD-300SX switches to Edit mode.

2.Press [INC] or [DEC] to select “Part,” then press [ENTER].

fig.disp.Prt

3.Referring to the following, press the TONE SELECT button to which the part number you want to change is assigned.

Press [LOWER SELECT] so that the indicator lights to select Part 9–16.

The channel number appears in the display while the button is held down. When the button is released, the status of the channel (on/off) is shown in the display.

TONE SELECT	Part	Part
button	LOWER SELECT=OFF	LOWER SELECT=ON
PIANO	1	9
E.PIANO	2	10
ORGAN	3	11
STRINGS/PAD	4	12
GUITAR/BASS	5	13
BRASS/WINDS	6	14
VOICE/SYNTH	7	15
RHY/GM2	8	16

4.Press [INC] or [DEC] to switch the setting to ON or OFF.

The indicator for the currently selected part flashes, while the indicator for a part that is ON lights steadily.

5.Press [EDIT] to turn off the indicator and quit editing.

You can return to Step 2 by pressing [EXIT].

On the RD-300SX, UPPER is fixed as Part 1 (Ch 1), while LOWER is fixed as Part 2 (Ch 2). Note that the keyboard won’t produce sound if Parts 1 and 2 are set to OFF.

43